If you are mechanically inclined I would and did do it myself. I saved about 1800 doing myself as opposed to paying a builder to do it.
Well so far in the last 3 years I have gone through a Optima Yellow, and two Exide Extreme Duty batteries. I used to be a believer in the deep cycle...
The Aeromotive ones work fine.
I have then on mine. check out my Cardomain for pics.
With MPH you keep your own heads. I have the 2.5's on mine and I still have my stockers sitting on the bench.
You do get what you pay for.
Do yourself a favor and use the Torco accelerator. It is not a booster but concentrated race fuel. It can make up to 107 octane out of pump gas.
I have 8-rib with my Novi and seems to be good. I am running it with a 2.8 pulley and a 106.5" belt.
i say get VT forged shortblock.
1+ that is what id the easiest thing to do.
I did rebuild my own and it was pretty easy. But if you don't have...
I don't know what all the complaining about Spec is about. I have a Stage 3 and there is no chatter, and the pedal is slightly stiffer then stock....
I am in the middle of epoxy coating mine right now.
I was plannig to do that but decided I need my garage more then waiting for paint to dry.
When I built my motor the cams spun easy without the chains and rockers in.
Easy enough that if I spun it hard enough they would continue to turn...
Search for Randy Stinchcomb or go to the Mod Depot site and look under Ford parts. Randy is at Libery Ford in Maryland.
If the plugs are different you will have to splice it.
Check out my car domain site.
It only took about 2-3 hours to cut and fit them up.
What are you high? Have you ever tried to bend a 2" round steel pipe? If square tubing so much stronger then round why doesn't everyone running a...
They look even better with a Novi.:D
Tim has always stood behind what his shop does. They built their shop an a great rep and intend to keep it.
Every problem I have had they have...
I just made my piping the other day. I only had to cut two pipes. I used a die grinder with a cut off wheel and a hack saw to cut mine. I wish I had...
Time for a t-56:nice:
MPH cams are great. VT stage III are nice cams too.
Probably a TOB.