As the title states,
Mine just hit 100grand.:D
More than a 13 year old boy,
I beat on mine pretty hard,
But I take very good care of it as well.
Looking from the front bumper,
Look at the pony in the plenum, directly below and slightly to the left .
Got a few questions for the all mighty::SNSign: Members:
1. Can I replace the trans.only, reusing my bell housing?
2. What would be a stronger...
Replacing the stat, flushing the radiator, and changing the rear diff. fluid.
I cant recall which tranny is in my 00(Stock), But it's time to...
I cant recall which tranny is in my 00(Stock), But it's time to change.
How manu quarts?, Mobile one, of Rp.?
Finishing the port and polish on the stock plenum, Which bits did you guys use to take off hte most, finish down the rough grooves, and then polish...
W/ The car off,
Put it in second, place a wood block on the shifter handle, and bang the :D out of it.(no it won't break anything)
:SNSign: :Teh-Win: :flag:
Are they that dificult to replace in the rear?
What are the steps in replacing/inspecting the wheel bearings in the rear?
Thanks for the tips,
Cooter thats a new on to me I'll have to try that tonight, Mitty you have as bad of luck with clutches as I do Rear-ends:D
Just replaced Clutch, flyheel, and T.O.B., I thought that a worn aout wheel bearing would come more from the rear rather than directly under...
I'm having trouble identifying a noise, only from a complete stop when releasing the clutch in first, there is a creaking sound similar to a ratchet...
If you have them,
Take the stock 17's and put them on the rear only. That might help.
Might have gone in some early 03's.:D
Hopefully you had your flywheel resurfaced before you replaced the clutch assm.
Yeah, I found the article, It's a pretty good write up if you feel like polishing the lenses (everytime you wash the car). It...
The gains that are accustomed to a catback/midpipe combo, are they equvilant to weld in midpipe combo?
I just replaced the clear/silver housings w/the smoked due to oxidation.
My question is, would waxing/polishing the lamp help protect the plastic...