I got the heads, PR's and headbolts. Prolly still has the rest. Send an email as he doesnt check the classifides often.
Plz email or contact me. I'm intested.
Building a 331 to go with my EFI, AFR 165, 4R70W, 1965 2+2....need cam
I have a set of 3.27 gears if you want to swap.
PM for contact info
$50 shipped to 32548
I'll take it
I'll take it.
Let's make a deal.
contact me, corky.p at cox.net
Did you get any comparitive times, on your, car stock AOD gears vs wide ratio gear set??
The Dang 351 would have been my first choice any way. 'specially as the Coug is heavier and has the room to acomodate, the slightly larger 351....
The fox body fender mounted solenoid has a diode in it to prevent the starter from "hanging". I copied Ford & replaced my fender mount solenoid with...
The bellhousing on the AODE/4R70W's is 1in deeper, other than that they are externally the same.
DS 1in shorter & Tranny mount to accomodate.
Yes I'm using a Baumann TCS. Other than using different tailshaft housings(interchangable) and yokes, the AODE & 4R70W are essentially the same...
You might find yourself to be a ground breaker, doing a conversion rarely if ever attempted by anyone else.
IIRC the 4.0 shares a bellhousing...
I'd think unless you want a"old school" look for a show car or have an engine not readily adaptable to EECIV, you'll be much better off sticking to...
AODE/4R70W's are 1 in longer than an AOD, because the bell housing is 1 deeper, otherwise the exterior dimension are exactly the same. There are...
I have a block in the machine shop now. I was going for just machining, and I'd do the assembly. But the shop will install the rotating assly about...
I had to use RRJM adjustable mounts, to find the "sweet spot" for mounting my 1650's. Once there they're perfect. I was ready to commit mayhem long...
With enough splinage remaining, you can cut or grind the .25 off. File bevel each spline end, good to go.
Kinda shade tree, but it'll work.