Does it cut out only under load or will it cut out just revving the engine?
Yeah, that's funny... As long as it does not squeak any more than it did previously.:)
Yes, pull the codes.. I forgot to tell you to do that the other day.. There is a thread on here that explains how to do it
The pip was going to be my next guess.. Not familiar with the location on your car, sorry. Mine is on the distributor
Yeah I think a new thread is in order for that problem. Might be ok if you didn't run it too long. I would say your first issue would not be the ecu....
Does not start? Or does not turn over? Explain exactly what it does.
I forgot to mention I did break a GForce transmission... Don't waste your money. Mine was 2k without the case. Maybe the case would have helped. Too...
I have an lx but I had my brother tint them for me using black paint and clearcoat.[IMG]
I have blown up 2-3rd gears in t-5's..... I shift hard and fast but not power shifting. I don't recommend beating a t-5, especially with sticky...
I put a set of 17x9 wheels with 275's on the rear of mine. I flipped the quad shocks around. I drove it around for 10 minutes no rubbing.
Put the 19's back in.. 24's are a waste of money IMHO. If you are not running any aftermarket heads 19's will work without forced induction.
Yes you should run 93, ttop is saying to top it off with 93. I put paint marks on 10, 12, 14* that way it's easier to see
What do you mean naturally chrome? Polished aluminum? Chrome is a plating
[IMG]here is the finished product. What do you guys think? I am going to spray the 5.0 badges also
Yeah take her to about 5200 on stock tach, looked like you were shifting at 4800
Yeah, I drove newbies car... Real annoying... I would be replacing it with something else. Felt like I was driving a 4x4 I was sitting do high.. Lol
It looks clean, I do not like the ricer headlights, I could pass on the wheels also. To do the a/c "properly" it will be expensive.. I just replaced...
I have 60's for my turbo setup which should be more than enough for my plans of 400-450hp with boost
We had 2-1/2 inches last winter and already over 3ft up here in pa... And it has been below 15* for at least 2-3 weeks.. So it snows, but never...