If you can use them I have a set of a ford 260 CID yours for the shipping.
The C2OZ-6200-A is for a ford v-8 221-260
The C3AZ-6200-D is for a ford v-8 260-289
Both will interchange
According to this site/bottom of...
Its a C5TA-6394-A according to this site it is for a 351 boss
Found this site and it seems like a good place for checking Ford casting...
The price is right 23.00 dollars so going to take a chance on it. Thanks for the fast response.
Will a truck bellhousing for a 302 fit behind a 66 289?
They are both 6 bolts. The bellhousing casting number starts with a C5 and is out of a 1970...
I have 2 sets of complete 65 drum spindles
1 Granada complete setup
Located in Phoenix, Az .
Steering wheel being off is not the problem. More then likely the carb and possibly the timing.
Except for the Granada spindle. But they are re-manufacturing it. In the stock mustang configuration from what I understand.
Granada parts are over the counter you just need to know the year of the donor vehicle or part number.
I Almost bought a set of disassembled mismatched parts .
They do make a drop in fuel cell for the 66 but it is expensive.
Let me take the opportunity to also thank you for your service.
On the other stuff...
What about just the calipers?
Will the Granada rotor and caliper fit the original Kelsey Hayes spindles?
Occasionally, I see them on ebay. always over priced.
Scribe or mark a line around the hinges or use tape so you can have a reference point to reset them. You really should not have to remove them. Just...
Can anyone please tell me what this part number is for:
Ford C1AE 8A 080 C
I pulled the intake, water pump and a valve cover. scratch rebuilding the 260 something went off like a hand grenade in it, the block is shot!
Finally figured out why I got mine so cheap, Its an Arizona car so no rust and in excellent shape.
The oil pump shaft was gone . So I figured it...