I should have clarified, the aluminum one in the pictures when you are setting the motor in the car.
The problem with the pan is it is a poor...
what water pump is on there?
also, did you use the frpp swap pan? They are very bad about leaving the pickup dry as stock. Seen several torched...
the letter cams do well with 90s tech considering thats when they were designed.
The e-cam works great with ported e7s/gt40s and a cobra/explorer...
To the OP:
It does sound like you need to do some reading on theturboforums
check the spring rate on your stock springs.
If they still have life in them you should be fine . . . I've seen stock springs run b cams, even a f.
what caused you to rebuild it?
dang, must be nice to be livernois . . .
not sure what a good valve job goes for, the old stone method is usually $80-100 around here....
Dang bhuff, you need to get on theturboforums more :D
woah . . . what happened to the blue?
it does like a lot more like a track car with flat black though.
sounds good . . . I'd go with 3.27s personally.
Lots of good advice in this thread.
UTI/Wyotech are overrated in my opinion. The dealership option has been explained and I ended up going to a...
oh . . . never realized someone replied.
Well . . . a whole year later and I still got em.
Don't be afraid to write a PM.
if you take the time to shape the chambers the actually turn out pretty good.
I remember the valves being .100+ higher in the head. Maybe .150"?...