since the coil packs have three prongs at the connector outlet. i want to check resistance to see if theres an open or short. where do i put the...
how hard is to replace the crank trigger??
i heard you have to align it.
well guys , my car shut down while cruising on the freeway the other day.
it cranks but it doens't start or fire up. theres fuel but no spark. i...
I've searched on this topic and i couldn't find the answer.
well i have a 91 4cyl mustang. i want to drop a 5.0 engine in it.
i want to keep...
the Meter should be on the Ohms setting right?
I have an 88 5.0 Mustang.
I recently converted it to mass air. I pulled some codes and got codes 41 and 91.
so i went ahead and bought new...
try Raybestos' BruteStop pads.
I put them on my girlfriends notch, and they work awesome. also try Raybestos' Brutestop Rotors.
let me know if you find the problem. I don't want to replace the starter and then later find out its the starter solenoid or...
so i should i replace the starter?
most of the times when i crank my 91 mustang 2.3 in the mornings, I hear the starter disengage early from the flywheel and just spin. sometimes it...
I got the same problem.
My Tach reads half the rpms. and my Check engine light stays on while this happens.
I replaced the DIS ignition module...
I replaced the ignition module, still have the same problem.
here a pic
I have a 91 2.3 Mustang.
I get codes 223 and 224.
sometimes the check engine light comes On and the tach only reads out half of the RPMs....
does a T5 from 95 Gt Fit in to a Foxbody 87-93?
check the ignition module on the distributor.
i had that go out on me , and i thought is was the fuel pump.
it won't give spark.
do you mean the Inner splash guards??
i thought they were different.
at 50resto.com they sell two different fenders and radiator supports.
for 91-93 mustangs and 87-90 mustangs
My 89 Notch has some front end damage.
I have this guy selling his fenders, radiatior support, bumper off his 93 LX.
do those part fit Ok?...