KOEO (Engine Off)= EVP:See if code 84 is present; PFE:low exhaust backpressure, blocked sensor tube, bad sensor
KOER (Engine Running)=...
It's difficult to find people that haven't had problems with them
That's putting it nicely
Oh yeah, duh...
How about a Z axle?
That would make more sense, huh?
I cut slots in the gaskets at the front and back holes
Also the only way I got the MACs to stop leaking was to use 2 gaskets per side
They have to...
I have a Z with a 3.08 from the factory
Mobil Synth ATF
The first time I used it I could do the 1-2 shift by just tapping the top of the shift knob
Yeah after trying about 3 sets, I ended up using 2 gaskets per header to stop the leaks on my MACs
It's pretty cheesy, but it worked
I want to get...
Do you mean a CARB Exempt #?
Did you bump or remove the 10-pin connectors (salt & pepper shakers) when you did the regulator?
They have been known to cause idle problems
It's not so bad once you get familiar with it and start to know your way around
And yeah, it's gotta be tough when you didn't see it before it was...
I know one of the front lines goes to the charcoal canister
The other doubles back to the BAP, the black box next to the vac. multi-tee on the...
Maybe this'll help
Thanks for the antenna shaving pics BadAOD
And nice job on the engine bay
I agree/me too
The diagram helped quite a bit
I'm adding it to the winter projects list
Z=3.08 w/ traction lock
And a batch of rockers and injectors...
If the factory uses tolerences for their parts, (x-z is OK, y being ideal)
You could have one car with 4 x injectors and 4 z injectors, 6 x rockers...
It's a loop of metal attached to the underside of your floor
It loops around the driveshaft
If the driveshaft breaks it keeps it from poking up...
They really like the Explorers over here now
And I live in soccermom hell so they blend in pretty good over here
That's prolly why they are...