I know this is a old posting but figured Id throw this in here for anyone that may be looking/searching for this info to help clear up the confusion...
Southside Machine /UMI lower control arms Has greaseable Delrin/Steel bushings. $95 shipped
LASH-22 & 25
290 int./300 exh.
250 int./260 exh.
640 int./670 exh....
The engine started after changing distributor suggests maybe the TFI or pick-up was bad in the original. BUT you later reinstalled the old...
The car did start BUT something else has arisen.
It "started once" says that either the fuel pump did come on or there was still pressure built up in...
I PM-ed you a coupe links.
C3W is the updated A9P if I remember correct but Im looking the website that has that info (I forgot the name LoL)
I was going to send you a pm (to...
Come on man, I STILL LOVE YOU.
Im not questioning your training & experience but you "quoted" (copy & pasted) to ME something vertvert posted as reference so I...
The fuel relay has constant positive power off the starter silynoid (fusable link).
You gave the fuel relay the "EEC sends out a ground to actuate...
I understand this info you list as where the EEC gets its ground "from" but Im speaking as the grounds the EEC "sends out to actuate components"....
Just to note.
This is not the same resister Im speaking of but then again this copy & pasted info is listed as "O2 sensor harness warnings".
If you have a T5 then you could use the auto EECs also. A little difference in the programming but will work.
If T5 then likely a A9L or a A3M.
Your local parts store can get refurbished EECs for same price range as the self sold ones but will likely have to...
Oh as a possable note, (& I think was pasted above) the 22 wire between the EEC & fuel relay may be bad but not likely but possable.
The EEC is not sending the ground signal to the fuel relay.
Your supplying the ground directly.
There is a 1.5ohm resister that's likely bad...
yes. The motor should start after you ground it. Just dont procrastinate
Can I get a signature also?
I hadn't slept since I signed up looking how to get my signature to work.
Now what year is this? :D