And you will need a new axle ;)
It's easier and cheaper to get a wrecked GT and swap the parts needed.
Just get a wreacked 5.0 or 4.6 and swap parts over. It's the cheapest and easiest way to do it.
Carb or EFI, you still need to change out the rear...
You will need new suspension, rear axle, tranny, engine and tranny mounts, radiator, harness, misc small things, MAF, and what you forget and...
No, the heads are the same but the SC got smaller cooling channels.
Guess they made them that way to make them sronger due to the boost
The SC's got smaller cooling channels in the heads for 1.
I know there is a sensor that control the fan and if unplugged it turns the fan on and keep it running.
You will need bigger fuel injectors and a tune and you're good to go :)
Gears and T-locks the only thing you will notice other than a turbo/supercharger. CAI, exhaust and pullies will help some, but not as much as gears....
Just get stuff for a V6 and you will be fine ;)
For 8K you can easily build a 350rwhp NA V6 :)
Hey man, it's wrong thread to post in, but take a look at Eibach :nice:
CEL = Check Engine Light
A blown header and a blown head gasket isn't the same, but still you can still fix it.
I just got a new head gasket kit from Autozone so no worries...
All you need is a new header
Why not just get a 4.3L stocker with heads, cam and intake with twins and still make 500hp for way under half of that 25K? :shrug:
What you can do is to get a stock GT cat back, it's cheap and you can easily change mufflers if you want that later. ;)
Dude, just get a Lightning MAF, why do it harder than you got to, geez.
What are your mods since you need to get something better?
When is the last time you checked/changed the oil?
Matt runs a single port with +600rwhp ;)
There are more high powered singleports than split ports :)
ProCharger only make a 11psi supercharger kit...