Love the videos
I think you had him on vid 2.
I did something like that against a 70 chevelle a few years back it was a 55 roll and...
You want to use the high torque mini starters not the big a$$ II starter
starts better and meshs up better with flywheel the balance weight is...
It is separate its a 2 wire circuit however it all runs into a single modular plug which mounts to the back of the cluster.
what is my standing
Gotta post to find out
also dont use a 74 hood latch cable on a 76 the cable is about 3-4 inches shorter it will still work but it's tight all through engine bay. just...
the frame extensions are bolt on right?
Why not get vince or other crafty engineer to mock up a set to fit stock motor mounts. It would be a one...
That's why I'll never sell ---I like living
not really sure why the mounts are so different :shrug:
the offset is in the frame extensions
II COOL! ! !
Not unless you plan on driving it the front end will be on the ground
If you need springs get a new set fox body cut 1.5-2 coils off 60-70- bux
wow megan you have a way with words --- just seam so ...:hail2:
Hey your welcome --you scratched my back before with wiring diagrams I'm happy to oblige. anything else you need/want pm me
Here this came from my book on how to build small block fords
Me II and love it ---wish I had done it 15 years ago I'll resurect the thread If I can find it. The headmans are 3 piece design also. The 2 end...
Must be all that camel toe you had on it.
no seriously if you're gonna own an old car learn it know what a lifter sounds like as oposed to main...
get you a 3.40- 3.55 ratio do you have T5 or C4 stay stay with the 8" just drop in a Trac-loc it wont be cheap though
I had a guy on ebay build...
I second the netzero thing the high speed is cool it just dumbs your pics down in quality while browsing ---for speed....
Nope not really---you have only seen a picture of one
If you're running high lift I would think so. The dished only controls the CR
yes because the intake opens 20-30 degrees before the piston reaches TDC on the exhaust stroke.
Just make sure you have valve reliefs or have your...