Do you think my car will be ok?
I have an 89 mustang HCI , 2800 [pci] converter [non lock up] AOD car with 410 gears.
No trani cooler, but I did...
When you remove the stock air box on a fox body, it leaves a oval hole in the iner fender, does anyone make something to pluge the hole?
I have an 89 GT with 2800 stallion converter, cobra intake, edl heads, stock cam with 1.7,s - 70mm throttle body, 410 gears, and a stock mass air...
I have an 89 GT with edl heads and cobra intake and 410 gears.
My question is how much stall should my converter be rated at? 2400--2600--2800--3000
What is everyone,s thoughts on buying a car with a rebuilt tittle?
The car in question is a 2007 gt mustang
I have an 89 lx , and if it sits for 3 days or more the bat will go dead
But not if I unhook the bat first
one more thing I made shure all the stuff...
are the new 6cyl,s interference motors?
When was the last year for push rods?
what year,s were push rod motor in the v-6 mustang?
does any of the late model mustangs have a timing chain problem with higher miles?
Does anyone on here now if the Gforce 5speed is a good trani? I have 450 rwhp and was thinking about one , thanks
My 95gt,s front crank seal goes bad every year or 2, I dont see anything wrong with the harmonic balancer.
anyone else have this problem or an idea...
I m leaning toward staying with standard shift but dont know what is the way to go
I forgot to mention that the trani already has a cobra gear set...
Has anyone else had a problem recently with motocraft oil filterss leaking?
will a mustang sn95 V-6 5speed work in in a 94-95 gt?
will a 5speed from a v-6 mustang swap into a 5speed 5.0?
can i put the in put shaft from a 95 gt 5speed into a 5 speed from a 4cyl fox body trans, and use the trani in a 95 gt?
is the 95gt bellhousing deeper than the fox body bellhousing?'
how tough is it to put a 95gt drive train in a 95 v6 mustang? what about the wiring harness?
Im new to the V-6 mustangs, can someone tell me if the V6 mustangs have the sparkplugs that can break in half like some of the other motors? ----...