Separate names with a comma.
Awesome. Thank you.
Does anyone know if the Moog upper control arm shaft kit, part# K8131 accept the grease fittings with 1/4"-28 thread? I know the off shore control...
Do you have any free play in your steering after the swap. I installed a borgeson box on my 68 and replaced all of the steering components...
Use Oatley expoxy putty here is a link,
Epoxy Putty :: Oatey.com
You can find it in the plumbing section of Home DePot. I used this to seal a...
Did you fix this issue? I have the same problem on my 95.
I should mention that the car has 1" drop 620 front springs, Shelby drop, 235/40zr18 tires up front with a 1" wheel adapter bolted to a Granada brake...
I'm in the process of redoing my steering system. I have converted the factory power steering to a Borgeson box, replaced both inner and outer tie...
I just installed this system in my 68 last weekend. I used a larger hammer to shorten the collumn. I found that the column needs to be almost fully...
Is the system still available? If so how much do you want and is this the base kit or the master kit?
The underbody is in god condition, no rust.
The car is still available, are you still looking?
What center console is that in post #38?
Not sure about the head light bucket, as I don't remember right now and I don;t have the car in front of me.
As for the lower radiator hose I used...
Do you still have the sunroof and both rear quarter windows? PM me a price if you do shipped to 18976
Price reduced to $3,800.
Anyone interested, make me an offer.
Did you have manual steering or factory power steering before you installed the Borgeson box?
Does anyone know where I can get custom parking brake cables made or get the fittings that are pressed on to the ends of a parking brake cable?...
I'm currently chasing a coolant leak on my 302, I determined that I was leaking at the head gasket on the passenger side so I deceided to check the...