Separate names with a comma.
just converted to carb and I have the fuel pump wired to a switched 12v so its running all the time,I have a FPR,is it safe for the pump to stay...
86 5.0 converting to carb and was wondering if the stock throttle cable would work on the carb and what bracket do I get,I'm useing a edelbrock carb.
can a stock 86 dizzy be converted to run on a carb set up?
selling my explorer upper and lower,sand blasted and painted aluminum.looks nice.make offer
selling a set of chrome shorty headers,only used for cam/motor break in.headers only,no bolts or gaskets.make offer
converting to carb,will take trades on hei distributor,carb intake manifold, edlebrock carb,5-9psi fuel regulator.
I have the speed density...
running to rich and flooding out..help
new 86 rebuild,stock bore 4vr pistons,e7 heads with aftermarket springs,tfs 1 cam,gt-40 intake,stock explorer...
will a 93 lx rear bumper cover bolt on a 86 lx?they have a 87+ gt rear bumper cover and side effects on it now,dont really care for the look.
do the o2 sensors have to be used on a 86?is there a bypass plug or some thing that I can get?
what one is better?what are the up's and downs on each if there are any?
cant find it anywhere in the book and dont want to over tighten them.anyone know what the torque is?
upgrading to a explorer intake.noticed on the underside of the upper there are more ports then my stock 86 intake.where do these go to or do they get...
just assembled my lower end with a reground 10-10 crank,recondicioned rods,new bearings(rods and main)new std pistons and new moly rings.oiled every...
looking for a cam,either a e303 or TFS 1 cam or simular.
what makes the stock 86 e6 heads bad?
ok got my pistons and with the explorer heads its gonna be 9.84 compression.would the tfs stage 1 cam still be good or should I change it?mostly a...
what CC's are gt40 heads off a 95-96 explorer?and what is the valve size?
changing the heads and intake.got it torn down to the block,is it worth pulling the motor to change the stock flat tops to 4vr pistons?
ok before I took my motor apart I raced a friend at the track with a 99 altima 2.4 4cyl 5 speed.took me in the 1/8 mile.got me off the line twice and...