Search results

  1. S

    Is this Clutch slipping?

    I have a 1994 5.0 5-speed. Toady I was driving to get smogged and sounded like I drove over a wire or something. I thought nothing of it. After I passed smog went home and floored it in first and rpm needle jumped to like 5000 rpm without the car moving any faster. Then I tried WOT again in...
  2. S

    edelbrock intake bolts for install

    will these be ok when i install my performer edelbrock intake. I noticed that the ones edelbrock suggest are longer looking than these but i like these. ARP 454-2001 - ARP Stainless Steel Intake Manifold Bolt Kits - Overview - SummitRacing.com
  3. S

    Could this be the answer to steering wheel play?

    Is the u-joint that connects to the steering shaft under the dash a common replacement? I think the play in my steering is coming from that connection.I installed a 03 cobra shaft and play remains.When I look under the dash and move steering wheel side to side I can see the movement of u-joint...
  4. S

    2003 cobra steering shaft?

    Does a collapsible steering shaft from a 2003 cobra fit our cars? If it does is it easy to install? I have lots of play in my steering wheel and will be getting an 03 cobra steering rack soon.
  5. S

    cobra white gauges

    does anyone know where I can get cobra white gauges for my GT? I have to replace my odometer gear but while im in there I want to replace bulbs with the superbrite white bulbs and swap to white cobra gauges. I am looking for the blue light look. If not original cobra gauges atleast something...
  6. S

    03 seats what track?

    Ok,I've searched and searched for info and everyone says 99-04 seats will bolt right up to our cars.That may be, but I want to make my 99-04 driver seat manual not electric. I took off the electric track and I see that the front holes on the seat and the back mount holes are not leveled to each...
  7. S

    black interior conversion.

    Anyone who has done their interior from tan to black help. I'm using black vinyl for 1994 interior from 50resto. First I clean with soapy water and scotch brite, wipe down then spray with prep cleaner then wipe again then paint. the result is flat black not similar to original interior black...
  8. S

    carpet replacement mass or no mass?

    What do you guys prefer when it comes to regular ACC carpet or mass backing carpet? Non mass is $119 and mass jute is $169. I know that mass back helps with noise but who doesn't like to hear their stang?:shrug:Sometimes its good to hear some noises to pin point a problem. I was really leaning...
  9. S

    steering wheel difference?

    I got a steering wheel from the junkyard a while back and i havent installed it yet.Im barely looking at it closely and it looks a little different from my GT. Its missing 2 lower brackets where the cruise buttons go. Any one have a pic of there steering wheel with no cruise buttons?Will that...
  10. S

    what hood is this?

    http://www.cardomain.com/ride/670349 What hood is this and where do they sell it?What do you guys think of it?I think it looks cool sometimes but then sometimes it looks to ricey.
  11. S

    prothane tranny mount

    Anybody with a prothane transmission mount can you please tell me what size is the crossmember to mount bolts? mine are missing. By the way is it safe to drive without them?
  12. S

    Is steering wheel puller required?

    Is it really necessary to use a steering wheel puller or is there another way? I found a black steering wheel at the junkyard and I have no time to rent one. Can I just wiggle it out? I've never done this before. Thanx guyz
  13. S

    oil leak: could this be the problem?

    Is this normal or sticking out way too much? Can this be the reason for oil splatter all over my starter, bottom rear of headers and bottom of rear spark plug boot?bottom pic is a tear in the front but no leak there.
  14. S

    door panel question

    Is the door panels from the 99-04 coupe stangs a good replacement for my 94 vert and is that 99-04 black the same as our black interior? I know my door has the 4 switches and coupe has only 2 but that looks like an easy fix. Is $140 alot or ok for an excellent condition pair?
  15. S

    which rotors are better?

    which ones would you guys get? I've heard no bad things on either. I want the least amount of noise as possible. StangSuspension Zinc Plated Cross Drilled and Slotted Rotors Front - For 94-04 G - StangSuspension.com Summit SUM-DSEP-54011R - Summit Extreme Performance Cross-Drilled and...
  16. S

    quad shocks neccessary after LCAs?

    Im installing my maximummotorsport LCAs soon. Do I still need those quad shockz or can I remove them without issues?
  17. S

    BBK camber plates any good?

    I've had some brand new BBK aluminum camber plates for about 2 years. I bought them without doing research and not knowing anything about stangs.I never put them on after I read that they were noisy and might even bend or break. Are they really crap or should I install? I've heard that...
  18. S

    adjustable pinion snubber over MM LCA's?

    http://www.dallasmustang.com/page/products.php?product=6721 I heard that an adjustable pinion snubber will fix my driveshaft rubbing problem. Is this true. Is there anyone who uses one? Please let me know before I try to fix with adust-LCA's. I rather put my money on engine right now.
  19. S

    need help with edelbrock parts for install

    I just recieved my edelbrock adapter and intake today from summit. Under suggested parts section is says pipe plug kit. Do I need this? And also which gasket kit iz better Edelbrockz, Mrgasket, or Felpro? And do I need that water outlet gasket? Sorry if these questions sound easy but im not goin...
  20. S

    MM control arms will they help?

    Is anyone using Maximummotorsports heavy duty Adjustable rear lower control arms? I want them to prevent my driveshaft from rubbing on the e-brake bracket and cables and I don't mind having the car a little higher from the rear, I think it looks kool. Do you guyz think this mod iz worth it...
Top Bottom
Back
Forums
Menu