Search results

  1. QUIKSVT

    Major Blow-By after HG + Cam

    OK, I noticed a long time ago a little moisture out the exhuast so I finally dove in and found both head gaskets were slightly blown from the water passages to the cylinder on the #2 #3 #6 #7 cylinders... I replaced head gaskets and dropped a cam in while I was at it. Buttoned the motor up, and...
  2. QUIKSVT

    Freeway Fun With Another Stang

    Went to a car meet in Corona Del Mar, met up with alot of forum guys. Had a little fun on the freeway coming home. My Cobra vs. 94 GT... Hes Powerdyne S/C'd @ 6psi, tfs heads, stage 1 cam, auto car w/ 3.73s, healthy running car... Anyways, heres the vid...
  3. QUIKSVT

    Stock Car Slicks = FUN

    http://www.youtube.com/watch?v=MvdLkeaATPg Had a little fun on a Late Model Goodyear Eagle slick. Vid quality is bad, it was too dark, but you get the idea...
  4. QUIKSVT

    AutoMeter Clock Pod

    I just picked up an AutoMeter 2-guage pod that replaces the clock. Was it supposed to come with supplied brackets? All I got was the plastic surrounding with no provisions for mounting it. Pics? Anything?
  5. QUIKSVT

    Motor shuts down under boost

    I have a 95 Cobra, stock motor. S-trim w/ FMU and the stock 24 lb. injectors with the inline pump Vortech supplied. The stock pulley, 3.3" I believe produces 5.5-6 psi and the car runs fine, feels rich to me. Sooo, a friend of mine loaned me a smaller pulley. I think its 2.75" give or take. I...
  6. QUIKSVT

    more idle troubles

    I'm so burnt out on chasing this damn thing... I have replaced TPS, MAF, IAC. The car starts up, runs up to 1900-2000 rpm, and sits there. If I rev it to say, 3000 it will stay there and fail to drop back down for atleast 10 seconds. When I shut the car off, it makes a loud noise like a...
  7. QUIKSVT

    sudden idle problems..

    so, car was running fine. I shut it off for about 10 minutes, restarted it and now its idle is funny. Upon start up it runs up to 1800 or so, then slowly drops down to 1000-1100 and won't come down any lower. It will occasionally drop to 800 or so after stopping at a light for a moment but for...
  8. QUIKSVT

    fan relay problems

    So, I've had this cooling issue with my 95 cobra. Stock cooling system. It seems the low-speed fan won't come on, it waits for the high speed fan to kick in. It comes on when the temp needle is on the A-L area of the guage, brings it way back down. I unplug the fan relay plug and reconnect it...
  9. QUIKSVT

    topend surging w/ Vortech

    I installed a Vortech on my 95' Cobra. Car is otherwise stock. Boost is stock 6psi... I have a problem with breakup once I get into boost. I've tried timing anywhere from 10* base up to 17* base. I gapped the plugs anywhere for 52 thou down to 36 thou. Nothing seems to help. It seems like it...
Top Bottom
Back
Forums
Menu