Search results

  1. U2SLO450

    No start........Sometimes

    Hey its been awhile since i posted anything, my cars have been running good until the other day. Now heres what happened. It wouldnt start so i checked to see if it had any spark by using an old plug and it didnt have any then i pulled the coil wire off the dizzy and grounded it a bolt and it...
  2. U2SLO450

    my car left me stranded

    Heres what happened. I took my little boy to school the other day and walked him to the steps and when i came back out my car wouldnt star (its a 90 gt mostly stock) It turned over fine but would not start. It was pouring down rain so i went home to get some tools and i went back after the rain...
  3. U2SLO450

    seat belt question

    A guy at work the other day came up and asked me if i knew where he could get a seat belt for an 86 saleen mustang. He said he didnt mind the color, he just wanted to get it on the road. I told him i wasnt completely sure but he could prolly get on from a junkyard. He said he was told that it...
  4. U2SLO450

    distributor part number

    I came across a distributor a friend of mine said i could have but i dont know if i can use it. My car is a 90 gt and the distributor says on it motorcraft e4ze-12131-aa. Can i use this distributor? Im not sure what car it came out of. Does anyone have a pic or a part number for a factory...
  5. U2SLO450

    quick distributor cap question

    does the rotor button actually touch the posts on the cap when it turns? My posts have grooves cut in them where the rotor button point is hitting them. They are kinda covered with a flaky substance too.
  6. U2SLO450

    strange problem still

    well it finally warmed up here and i plan on doing the hci swap but my car still has the strange miss every few days. It will start up fine and idle and it will run great for days, then out of the blue just crusing along the rpms will bounce down quickly and the car will start jerking. (it...
  7. U2SLO450

    high rise intake?

    how can you identify a "high rise" over a normal intake? What are the major differences? Are there any visual differences? thankx.
  8. U2SLO450

    cam/rocker help please

    -Its finally getting warmer here so im going to do the h/c/i swap. The car is a 1990 gt. Im using gt40p heads with 1.94 valves, e-cam, and cobra intake. I plan on buying new rockers but i dont know which ones to get. I was looking at the crane energizer 1.7 rockers but im not sure if they will...
  9. U2SLO450

    carfax please?

    Lookin at a new ride VIN (1j4gw58n4xc667666) thankx!
  10. U2SLO450

    hard miss under load

    i have a 90 mustang gt that will miss under load usually at the beginning of third gear. It will be running fine and then all of a sudden it will jerk/miss hard one time and the tach needle will jump and it sounds like the car shuts off but it doesn't. Ive replaced the plugs/wires and the cap...
  11. U2SLO450

    car stall problem

    The car is a 90 mustang gt with exhaust and headers. I installed the headers 6 months ago. I was going down the street in 3rd gear then it started missing/stuttering/bucking and it almost shut off, (the battery light flashed real quick but the car didnt die) It has started doing it more now so...
  12. U2SLO450

    Fan keeps cracking

    I have replaced the fan twice already because it keeps craking in between the blades. Its the plastic factory one. I think it keeps cracking because it barely rubbing the shroud at the bottom. No matter how i fix the shroud it seems to be just low enough to rub. My question is could i run it...
  13. U2SLO450

    horn fuse

    the other day my horn fuse crapped out so i replaced it and it worked for a minute but it ble it again. Is there any particular reason why my horn fuse keeps blowing?
  14. U2SLO450

    3.8 to carbed 302

    Well, heres the situation. I have a 96 v6 mustang 5sp with a dying motor and a stock 1990 mustang 302 motor sitting in the garage in the pretty much. So the million dollar question is how hard would this swap be? The car would just be used to get from point a to b ( it wont see any racing or...
  15. U2SLO450

    replacement transmitter

    Quick question for ya, I broke my remote transmitter the other day (you know, the thing that has the 4 buttons on it for PANIC, TRUNK, DOOR LOCKS, and hell i cant even think of what the other one is for but i got a new replacement one and it says it has to be programmed by jumping wires in the...
  16. U2SLO450

    new bearings question

    Im finally ready to swap my hci, but i need to know what bearings i need to replace? I dont plan on pulling the motor, do i just get new rod and cam bearings? Are they absolutely necessary? How hard are they to install?I was just going to install the new heads and cam/intake and run it like that...
  17. U2SLO450

    clutch pedal noise

    I noticed the other day when i take off from a stop the clutch pedal makes a small "creaking" noise as i let up on it. Anyone have any ideas what this may be?
  18. U2SLO450

    cobra intake baffle

    I read a lot of things about people calling ford or somewhere and getting a larger baffle for free, does anyone have a number to call where i can get one to? Is there something really wrong with the one that comes on it?
  19. U2SLO450

    gauge question

    Whats the difference between short sweep and full sweep gauges?
  20. U2SLO450

    horn stopped working

    well my horn crapped out the other day and i have no idea on how to fix this. Do i just buy a new horn or is there someway to test it out or something? I need to get this fixed because inspection time is coming up:notnice: (the funny thing is thats all the guy does is pull my car in and blow the...
Top Bottom
Back
Forums
Menu