Search results

  1. dlascoskie

    Let's Talk Fuel Rails

    Does anyone know if the pressure regulator on a 96 GT fuel rail is the same as the pressure regulator on a 96 Cobra fuel rail? I know that it regulates based on a reading it gets from the intake manifold, but I'm curious if the GT regulator will work properly with 24lb injectors. Thoughts?
  2. dlascoskie

    Fuel Rail help

    Anybody know if either a 2003 Mach 1 fuel rail or a 03-04 Cobra fuel rail would work with a 97 Cobra intake?
  3. dlascoskie

    What are these??

    In this picture.... http://www.dallasmustang.com/product_images/0009911.jpg What are the 4 rubber tubes for?? They are listed as spacers.....is that on 2000+ motors?? cause I don't see them on mine.
  4. dlascoskie

    Solid Lifter for Degreeing the 4v Cams??

    I've heard of people welding a fully-pumped up adjustable lifter, and using that to degree the cams. Any drawbacks or tips/tricks I should know about this method. Also, anybody got any links or ideas for a different method? And finally, if you've purchased SHM reground cams, do they send the...
  5. dlascoskie

    Head Gasket/Head Bolts Kit for the 4v??

    Anybody have any links or part numbers on a 4.6 4V gasket kit/head bolt kit........including head gaskets, head bolts, exhaust gaskets,and possibly valve cover gaskets?? I found a ton of 2V stuff, but no 4V stuff under $400. Also, anybody have a line on 4V valve stem seals for under $80...
  6. dlascoskie

    Freeze Plug Kit for 4.6 4V??

    I'm having a hell of a time trying to track down a brass freeze plug kit for the aluminum 4.6 4v I'm building. Anybody got a part number or two for me ?? I'd like to go with Pioneer, but at this point I'm open for anything.
  7. dlascoskie

    Brembo 4-piston Calipers

    http://www.buyfordracing.com/shop/product_info.php?products_id=621 A few questions on these beauties: 1. What size brake pads do you use for these?? 96 Cobra or 96 GT, or something completely different? 2. What size rotors must be used? 10", 11", 13" or something different? 3. Do they come...
  8. dlascoskie

    Brake upgrade question

    Will the Mach 1 and/or Cobra brake upgrade kit fit under the factory double spoke five stars on my 96 GT? 50 point bonus followup question....... What's the difference between a 96 GT and Cobra tranny?
  9. dlascoskie

    Mach 1 Super Cobra Jet Trivia

    How do you tell the difference between a 1970 Mach I 429 Cobra Jet and a 429 Super Cobra Jet. Where are the engine codes on the block and which code = which block??
  10. dlascoskie

    2v to 4v motor swap question

    Can a GT computer be reflashed to run a 4v cobra motor? If so, is a Ford dealer the only place that can reflash it for me? Any other tips or ideas are much appreciated. Thanks for the help!
  11. dlascoskie

    Overhead Cam Spring tool?

    I've got a traditional push-rod head spring tool and it doesn't reach down far enough to compress the overhead cam springs of my 4.6 dohc. Any suggestions on what tool to use/buy? Thanks.
  12. dlascoskie

    Main Bearings Removal Question

    On a DOHC 4.6, how do you back off the adjusters screwed into the side of the block, to allow the main caps to come out? It's a six sided fitting, but I'm wondering if anyone knows the size off hand. Thanks.
  13. dlascoskie

    Classifieds

    Put in classifieds.
  14. dlascoskie

    Anybody know what this means....

    "Also included is a set of aluminum IMRC plates that have the rods and butterflys removed. Ready for some epoxy for additional horsepower! "
  15. dlascoskie

    Suspension Nerds...........

    Talk to me about the Kenny Brown TracK it http://www.springfieldmotorsport.com/newkenny.html Friend of mine wants to unload it for $300
  16. dlascoskie

    Mercury Marauder Cobra Brake Upgrade??

    I know this is slightly off topic, but does anyone know if a Cobra Brake kit will work on a 2003 Mercury Marauder without any modifications??? Thanks for the help.
  17. dlascoskie

    Driveshaft.....Aluminum or Steel?

    An off-road excursion at the track caused some serious damage to my stock driveshaft. It must be replaced. I am considering an aluminum driveshaft from Ford Racing, but have been cautioned that aluminum might not be the best way to go. Thoughts??
  18. dlascoskie

    What's an air silencer?

    On this site, http://www.mustangworld.com/ourpics/sounds/sounds.htm , they refer to "removing the air silencer". What are they referring to?
  19. dlascoskie

    Annoyance Tech

    2 days before a race and the stupid emergency brake light won't go out. I checked the cables, they aren't binding and the e-brake isn't on. So, it's something electrical. I'm just trying to make this a quick quick fix.........where should I check first?
  20. dlascoskie

    Whatever Happened to....

    "My Garage" ? Am I missing something, or wasn't there a profile page where you could view pics of our cars??
Top Bottom
Back
Forums
Menu