Search results

  1. black_96_GT

    Help with rumbling sound

    As the clutch is almost fully released in 1st and 2nd there is a rumbling sound coming from the engine. It also occurs between 1500 and 2500 rpms sometimes in higher gears if I floor it. Anybody have any ideas what this could be??
  2. black_96_GT

    What to do???

    Should I get a 99+ GT or spend the money to fix my 96GT. Here is what it needs: 1. body work total ~ 3K 2. well over 120K odometer stopped working there 3. non-pi 4. Interior is 10+ years old. It won't be long before it needs a new motor and tranny (especially the way I have been...
  3. black_96_GT

    Burn it up

    So I'm sitting at a traffic light and I think to myself is that smoke from under my hood? Nah, probably just exhaust from the car in front of me. As I cross the intersection there is the distict smell of electrical stuff burning. Shoot I better pull over, I'm about .25 mile from home so I...
  4. black_96_GT

    Auto body in florida

    Anybody know of a good auto body shop in NE Fl or SE Ga. I need to freshen up the exterior.
  5. black_96_GT

    Hood opinions

    I am going to get a new hood. Why, because I was stupid :bang: . Anyway, what can you guys recommend. I am thinking heat extractor style, ram air, or cowl. Who really makes the best hood for about $500? I was thinking Cervini's, Harwood, Steeda, or Boss. Can't seem to find anything about...
  6. black_96_GT

    Finally complete

    After many hours of messing around with inadiquate tools, I finally finished installing all of my suspension parts. These parts have been in my garage (minus the shocks) for about 1 year, Ford C's, X'2's, KYB AGX's, BBK isolators. I can't wait to get the alignment and see how she rides!! :D
  7. black_96_GT

    Finally finished suspension

    So it has been about a week since I started my suspension upgrade. WTF!! I don't have large amounts of time to do this so it is a little each day. It sure would of helped if the bastard that wrote the Haynes manual wasn't an idiot. DISCONNECT THE STEERING RACK :crapola:!! There is no need...
  8. black_96_GT

    Should I cut it

    I can't seem to get the ball joint nut off, I was wondering if I should just cut the nut with a dremel or go and buy an impact wrench and compressor. I am putting in x2's so I don't need the old ball joint. What do you guys think?
  9. black_96_GT

    Balljoints

    How tight are the nuts that hold the balljoints in suppose to be? I can't seem to break it loose. It's like Superman tightened that mother. :lock:
  10. black_96_GT

    help removing steering knuckle

    What is the easiest way to get to the power steering supply and return lines on a 96 gt? The car is on jackstands and the wheel is off (driver side).
  11. black_96_GT

    Blistein or KYB AGX?

    Since the price is almost the same what are your thoughts? Mostly DD. :SNSign:
  12. black_96_GT

    Ford C Springs?

    What is the best way to cut the dead coil off and how much should I cut (1 coil 360 degrees)? I am looking for the 1" drop in the rear. Thanks.
  13. black_96_GT

    Battery Cables

    I just bought a new battery cable assembally for my 96Gt, the problem is there is no wire in the assembly for the oil level sensor. I was going to use the old one but there is no where to plug the wire into, if anyone can help Thanks. :flag:
Top Bottom
Back
Forums
Menu