Search results

  1. M

    Transmision whurring noise and trouble shifting

    just had a king cobra clutch kit installed, and new pilot bearing. Also put in synthetic trans fluid. The car also has a b&m short shifter. It makes a whurring noise that increases with speed only, not rpm. Sometimes it also has a little trouble going into gear and sometimes grinds. it...
  2. M

    Fox body stock h-pipe does not fit SN95

    i believe it was posted before that a 87-93 mustang stock h-pipe would fit a 94-95 GT. Well i tried it and it does not fit, it is about an inch off. I did cut the hangers off. The h-pipe was from an 89. Just thought i would let people know. Maybe some people have had success? jeremy
  3. M

    Whats the difference between these clutch kits?

    on summit racing there are 2 FMS kits with exactly the same part number and description...i was wondering why one is $20 more here is a link http://store.summitracing.com/egnsearch.asp?N=700+4294908282+4294925134+4294840126+4294865886+4294924755+115+4294907673 thanks jeremy just...
  4. M

    Ignition timing problems

    we first hooked the timing gun up to #1 spark plug wire and checked the timing, 10 deg. was on the opposite side it was supposed to be on. We put the timming light on all the other spark plug wires and got nothing close to where it was supposed to be. Sometimes it would be on the bottom but...
  5. M

    Best way to flush coolant

    what do you guys do to flush all the coolant out of your cars, i need to flush absolutely all the coolant out of the system....i did a search and some people said to just use a garden hose. So do i just disconect the hoses in the front of the engine and run it with the garden hose in one of the...
  6. M

    Grind when letting clutch out after shift

    Title says it all. There is a really bad grind when letting the clutch out after shifting. It also doesnt seem to want to go into fourth or fifth gear(maybe i am not used to short shifter). My friend thinks its the pressure plate(?). Once it is in gear it hauls ass with no slippage, but does...
  7. M

    Idle issues (idles at 2000 rpms)

    First of the car has a systemax upper, 70mm TB, edelbrock TB adapter, 70mm Mass air, exhaust and some other stuff. car starts up fine and is drivable. ok i am still having problems with my idle, it idles at 2000 rpm except when you first start it, it idles at 1500 rpms (clutch in or...
  8. M

    what year stock H-Pipes will fit on a 95 GT

    I need a stock h-pipe to pass smog. Just curious what year h-pipes will work (car has stock headers and flowmaster mufflers). 87-93? 96-98? 99-04? Also with the pcv valve bypassed will the car still pass smog? thanks jeremy
  9. M

    Part # for gasket between TB adapter and upper intake manifold

    title says it all, i cant find a gasket to go between my edelbrock throttle body adapter and my systemax upper intake manifold. If any one has a link or part # for this gasket that would be great. thanks jeremy
  10. M

    idle problems with 95 GT

    its a 95 GT with 103,000 miles, it has a systemax upper/lower intake, a bbk 70mm throttle body, a edelbrock intake elbow, bbk fuel pressure regulator, and 24lb injectors. Alright the problem is that it idles at 2000-2500 rpms, clutch in or out.. dont know what else to put down thats basically...
Top Bottom
Back
Forums
Menu