Search results

  1. 9

    Coilover options

    Im looking for a good set of coilovers (front and rear). Im thinking about ordering some MM, but wanted to see what everyone thought first or if someone had some different recommendations B4 I drop $1700. Has anyone heard of "NEX" coilover? saw a set on ebay for about $760ish Thanks for...
  2. 9

    help chosing an oil pan

    Im looking at the deep sump S/S or the "T" sump RR Canton oil pans, but not sure which one to get. This is going on a street car that will see the track. What are you all running on your cars Thanks for your replies
  3. 9

    Saleen/ Alcon calipers ?

    there is a set of Saleen/ Alcon calipers up for bid on ebay off of a 94 Stang. My question is what size rotors have to be used 13" or 14" and if only a certain type will work? (like a certain brand etc) Will they clear 17" wheels and how much are they worth? Thanks!
  4. 9

    17x10 wheel Q?

    Im looking to get a set of 5zigen FN01R-C lightweight wheels I want 17x10 in the rear -- they offer a +12 and +25 offsets, +12(about 6" BS) and +25(about 6.5" BS) -- which one would fit/ look better in the rear? For the front its either 17x8 or 17x9 -- For 17x8 -- they offer +25(...
  5. 9

    calculating compression

    how do i calculate the compression with a 60cc head? Compression with a 58cc head is advertised at 10.4:1, 9.7 w/ 64cc head
  6. 9

    Main bearing problems??

    ok Im in need of some help with my motor, i got the block and rotating assembly back from the machine shop and began assembly, now heres the problem, after getting all the main bearings in and the thrust in the center and torquing all the mains down , the crank wont turn at all (everything is...
  7. 9

    302 worth it?

    is $200 too much for a 302 out of an 85 LTD? or could i get one cheaper at the junk yard? thanks for any replys
  8. 9

    vibration problem solved!!

    ok so ive posted on here a time or two about a really bad vibration problem starting at about 65-70mph and up, i went through and replaced part after part, and one of the 1st things was the DS, took it to a driveshaft shop and had them retube and balance it, put it back in the car and the...
  9. 9

    edelbrock heads

    does anyone know what makes the performer RPM heads non-emissions and performer heads emissions? and do the RPMs put out more power over the performers??
  10. 9

    engine build recommendations

    im lookin at doin a build in the near future, a 306 possibly a lil bigger with edelbrock performer rpm heads 2.02/1.60 with the edlebrock rpm 2 intake and a 70mm tb, im not sure what type came tho. i want a somewhat rougher idle. my goal is 400rwhp that is for the most part a daily driver. is...
  11. 9

    PLEASE HELP! BAD VIBRATION!

    hey whats up, im new to stangnet, i have a 92 lx notch 5.0 that ive had for about 1.5 years, since ive had it it has a had a really bad and i mean bad vibration from 75mph on in any gear, whether accelerating or letting off, the vibration feels like its in the center of the car and the shifter...
Top Bottom
Back
Forums
Menu