Search results

  1. L

    OBD Codes NOT READY For Inspection?

    Hi All I bought my 2007 GT/CS recently from my Ford Dealership w/ 3800 miles on it. Now since it is technically a "used" car they are responsible to put a inspection sticker on it. WELL they tried 2 weeks ago when I picked it up, and the tech said the "New" emissions scanner they started...
  2. L

    Diff. Cover and BMR PanHard Bar

    OK I just ordered my 4.10's and was trying to decide on getting a Steeda/LPW Alum. Diff cover. BUT does this cover fit w/ the larger BMR panhard bar??? Anyone have this setup?? Oh BTW...What fuid are you all running in the Diff?? Royal Purple?? OR??? and how much does it hold...
  3. L

    4.10 Gears Good with 20" wheels

    Hi All I am going to swap the gears on my 07 GT/CS I just picked up. It has 20" Carrol Shelby wheels in the rear. Tires are Nitto Drag Radials 305/35/20. The car is a MT 5 spd, NA. All bolt ons I have a brand new complete kit (w bearings and all) of 3.73's here, But it looks like most...
  4. L

    Ring & Pinion Kit Part # ??

    Hi all I have a complete rebuild kit here in the garage part # 5L3Z-4209-C. I beleive it was some type of repair kit for the 8.8's. I just bought a 2007 GT/CS and was thinking of swapping the stock 3.31's I beleive w this kit and the 3.73's included. 1st ? I guess is .... Are all 8.8...
  5. L

    Support Bracket on top of rearend housing?

    Hi All I just bought a 2007 GT/CS that has an incredible amount of time, $, and parts into it. I am trying to look it over so i can find all that was done to it. This one particular ? came when i was looking at the BMR Panhard setup in the rear and noticed a loud creaking sound in the...
  6. L

    FMS newer Part # gears??

    Hi all I have a complete rebuild kit here in the garage part # 5L3Z-4209-C. I beleive it was some type of repair kit for the 8.8's. I just bought a 2007 GT/CS and was thinking of swapping the stock 3.31's I beleive w this kit and the 3.73's included. 1st ? I guess is .... Are all 8.8...
  7. L

    H/C/I whistle with Systemax intake

    Hey Guys, I just put mine h/c/i combo back together, and I have a annoying whistle. It is the loudest at around 1100 rpm, if the idle drops it seems to fade away. I have TFS SH heads, AFM N41 cam, Systemax II intake, and Professional Products 70mm TB. I would like to blame the TB, BUT the...
  8. L

    Valve Cover Vent Tube

    Hi All, Does anyone reccomend capping off the vent tube on the oil filler of the valve cover? I just got new valve covers and Systemax intake, and was wondering if I could cap off the vent from the Throttle body to the filler neck? Thanx:flag:
  9. L

    Keep Blowing Head Gasket, cylinder #5

    I just pulled my motor apart for the upcoming head and cam swap. And upon examining the head gaskets I saw that cylinder No. 5 has a blown spot at the top water jacket. This is the 3rd time this cylinder has blown. The 2nd time was a fuel pump failure (while on the n2O), so it could not be...
  10. L

    Anderson Ford h/c/i/ Kits

    Is anyone running one of Andersons h/c/i kits listed on their web site?? I was looking at the TFS Track Heat kit, but cam across Andersons options also. I don't really care for the Typhoon intake, although I hear it performs well. And I was told his N41 cam was a good grind?? Any Input??? THANX
  11. L

    Flycut Pistons? for Head/Cam upgrade?

    Hi All, I have been researching my next upgrades of heads and cam. I am leaning towards the TFS Track Heat Twisted Wedge heads or the Edelbrock Vic Jr's, or AFR 165's. All with 2.02/1.60 valves. Cam will be a decent choice to match the heads and my mods, the Wolverine 1087 was mentioned. 1.6...
  12. L

    Victor Junior or Twisted Wedge for 302?

    Hi All, I am ready to buy a set of heads and was told to look at the Victor Jr's as well as the Twisted Wedge. Are the Jr's too large for a 302 block? The bottom end has been rebuilt, I have BBK 1 5/8" Long tubes, TFS Street Intakes, NX 150 Nitrous (don't run it alot though), and the other...
Top Bottom
Back
Forums
Menu