Search results

  1. 9

    quarter windows

    A few months ago someone on this site told me about somebody they knew that would refinish the quarter window molding on both windows for $100 dollars. I cant find that PM and now i need it. Me and my buddy would like to send ours to him. If i cant find the original guy i was lookin for maybe...
  2. 9

    carb pros

    Engine specs are listed in my sig. I have a problem with running rich. Dark smoke at idle and fouled plugs. Anything after 3000 rpm is no problem. But at idle and when i first hit the gas it smokes. I did a compression test to make sure no problems with rings or valves. All cylinders were...
  3. 9

    spark plug and timing question

    Engine description is in my sig.Wondering what auto lite plug would be best for my engine as well and a good gap to start with. Also what what total timing would you all suggest. I dont know if it makes a difference but i pull 5.5 inches of vacuum at idle on account of the cam and no power...
  4. 9

    Help! Need help with 351 2 piece rear main

    It is a 351 with a two piece rear main seal. My mech. installed a new one last thurs. He let it idle for 20 min. Did not leak. By the time i got home it was leaking again. The leak is pretty bad. He is going to do it again Mon. He did not drop the tranny the first time. He dropped the k member...
  5. 9

    how to install PCV valve in carbed motor

    I have a 11:1 compression carbed 351 motor. I just blew a rear main seal. It has no pcv valve. Just a breather cap on each valve cover. Could the lack of a pcv valve have contributed to my blown rear main. I've decided to put in a pcv. What would be the easiest way to do it. There are no acc...
  6. 9

    Do i need a pcv valve

    I have a 351 bored to 358. It has 11:1 compression,ported stage 2 twisted wedge heads,victor Jr intake,holley 850 carb,.588/.612 lift cam. It has adjustable upper and lowers. Moser axles and moser spool. Has all the suspension components for a strait line. Either my oil pan or rear main has a...
  7. 9

    Rear main

    I have a built 351 with 11:1 compression. Any way the engine has about 2k on it . Now i have a leak between my TKO 600 bell housing and the 7 quart moroso oil pan. There is not enough room for me to see. The rear main is a 2 piece. It is either that or the oil pan. I am not going to do it, a...
  8. 9

    good combo????

    I have 351 block bored to a 358 with probe diamond pistons,comp solid roller cam with a 588/612 lift and 288/300 duration,track heat twisted wedge heads stage 2,victor jr intake,850 holley and 1.7 trickflow rockers. The engine has 11.1 compression. It also has a 150 shot. Fuel cell,nitrous tank...
  9. 9

    anyone running this combo

    I have a 91 lx hb 5.0. This week i am buying the trick flow upper combo PT#TFS-K514-360350 (heads,stage 1 cam,track heat intake) with grenatile(spelling is wrong) mass air calibrated for 24# injectors,70mm BBK TB,MAC long tube headers with h-pipe and flows,new roller lifters,255lph fuel pump,new...
  10. 9

    what to do

    I have a 91 lx hb 5.0. Stock exept for MA,TB,pullies,headers,exhaust,373 gears. I am wanting to buy the best h,c,i combo with the most power without flycutting pistons. Bottem end will stay stock till it breaks. Want everyone's opinion on combos, whether it is a kit or a mix and match. Post some...
  11. 9

    what will i need?

    Hello guys, I am going to get the trick flow heat h/c/i/ combo and was wondering what all i will need. Bigger injectors?bigger fuel pump?what size? fuel pressure regulator?What type lifters? And anything else i will need to make the install complete.Does anyone have any times and rwhp ratings...
Top Bottom
Back
Forums
Menu