Search results

  1. H

    89 GT

    A few months back I picked up an 89 GT Hatch. The PO had built the engine to include e303 cam, crower roller rockers, 58cc ported heads, Car Tech intake with 70mm maf, bbk cai, flowmasters. However he has left on the stock headers and cats. I have not really messed with the newer FI fords...
  2. H

    How to tell world class t5 from 4 banger

    I have found a good deal on CL on a T5 guy says it's from 88GT how can I tell what it really is?
  3. H

    gauge issues

    What causes the fuel gauge to peg out way above the full line. Also my speedo is not correct the car is suppose to have 355 gears but it seems to be way off like 20 25 mph.
  4. H

    Re-attaching trim pieces?

    How do you re-attach the 3 inch trim pieces that go around the car when they start to come lose? I plan to re-paint the car soon and would like to remove the pieces to paint. I am then thinking about painting the trim black all the way around.
  5. H

    Picked up a 89 Gt

    Bought an 89 Gt today. It has had some work done including e303 cam crower roller rockers, 58cc ported heads Car Tech intake with 70mm mass air flow, bbk air intake, flowmasters and Centerforse clutch. It still has factory headers. I plan to buy some shorties. How difficult install is the...
  6. H

    Help a guy out

    I am tinkering with the idea of using a 64-66 tailight benzel and glass on my motorcycle. I am needing the measurements of the benzel. ( height and width) I will have to fab a backing plate and the wiring. I just love the stangs(I have a 67) and wanted to incorporate it into my bike. Also...
  7. H

    Spal fan Problems

    I have a spal electric fan with a 185 thermo. Well I drove the car about 60 miles yesterday and got the temp up past 185 around 210 and the fan is not coming on. It has power but I am thinking the thermo may not be working. How can I test that to see if it is infact not working. What does...
  8. H

    I think this would be cool.

    Imagine a classic 65 66 Stang running 12's and not using a drop of fuel. This would pretty cool in my book. It will never replace the rumble and smell of a classic, but I see a day I cannot afford fuel and this may just be an option that allows us to keep driving the classics. Oregon Field...
  9. H

    Tell me why I should not!

    I have been thinking of trying to trade or selling the 67 to get a 93 Cobra. I have always like them but I know this car inside and out. Just struggling. Here is a few pics
  10. H

    See if anyone can make heads or tales of this?

    I to have a new motor like a few others on the board that likes to run around 230. it has never boiled over with just a 13lbs cap? However on the highway it hits 230 and creeps a little. As soon as I come to a stop hit the breaks the temp needle will drop to 190 maybe 200. I know this is not...
  11. H

    How long does a new engine run a little warmer?

    Just took my 67 out for her first highway run and she got a little warm about 225 or so the electric fan was working and when I slowed down to come into work ( about 2 miles of 1000 to 1500 rpm driving) she cooled back down to 190. I know a new motor can run a little warmer just wondered how long.
  12. H

    Any Ideas??

    Well got the trans figured out it working great now but headlights was out replaced Dimmer no go then replaced the headlight switch head lights work. I then notice that the blinker lights in the dash seem to be on solid. SO I got to looking around and see smoke coming from the top of the...
  13. H

    Some pics of the 67 with foose wheels

  14. H

    MY interior is finished lots of pics

    Whats do you guys think? One of the grille and the emgine bay once more
  15. H

    Head light switch

    How do you remove it. My head lights are not working after getting the car back on the road just figured out they where not working last night figured I would start at the switch. I did put a new turn signal switch and harness in and they are working fine.
  16. H

    Getting there Engine bay pics Opinions?

    The cam phone pic didn't turn out real good and have some cleaning to and a few more hold downs. also thinking about putting a black wire loom on the hot cable on passenger side shock tower. Also the export brace is off by about a quarter of an inch going to have to figure out a way to squeeze...
  17. H

    AOD ?

    Drove the stang to the house today. Was a little nervous as the AOD was only set by setting it up at WOT did not have a pressure gauge to check it. It shifted good and pulled really strong. The drive was only about a mile. I plan to take it to a trans shop to have it adjusted but wondered if...
  18. H

    It's alive!!!

    After what seems like forever (at least 3 years) My 67 is running again. I know a lot of you have done your own builds and such. This was my first full engine build as well as swapping in the AOD and I can't tell you how good I feel. I have worried night and day about if I may have forgotten...
  19. H

    71 mach 1 auto Cleveland car

    I have a chance to purchase this car but the motor and tranny is gone. It has new floor pans and a little exterior rust but not to bad. Whats the value of these big cars with the Cleveland motor? I think it's priced right but was curious what you guys thought. If not really that valuable I...
  20. H

    What would this combo make?

    71, 302 30 over flat top forged pistons with valve reliefs wind age tray, 65 289 53cc heads screw in studs ported, polished, with 195 in 160 exh behive springs, 1.6 roller rockers, Wiend stealth intake Lunati Voodoo cam Duration 262/268, Lift .499/.522. and what would be a good carb for...
Top Bottom
Back
Forums
Menu