Search results

  1. 95cbr331

    oil pressure problems

    Im having an issue with seeing no oil flow...so no pressure, from where the pressure sender resides in the front of the block on the driver side. The block is a dart sportsman, i have a 7qt canton oil pan with the required pickup. And as of far i've tried 2 pumps. The motor has 100 miles on...
  2. 95cbr331

    Wrapping up

    My finals then its finish the mustang time for summer, ,but i got a question i need answered.. My question is when i got my car tuned last May, its had a lot of down time, i saturated the MAf at 5k rpm. So my Tuner john of Horsepower Ranch in Marysville suggested using a mafia Maf extender...
  3. 95cbr331

    Vacuum line?...and wire hiding

    Do i need the vacuum line that goes into the firewall with the A/C? All my A/C is removed except the condenser(?) in the dash. Is that line essential to normal heater controls? Im in the process of cleaning up all my wires and vac lines while I wait for the k-member to come in. Just...
  4. 95cbr331

    Finals Over... time for spring project

    So I haven't been on here posting in a long time. But i check in once in awhile seeing what everyone is up to. I just finished my finals for the quarter and its time for some R&R and car work.lol An engineering course load it pretty stressful and occupies my time along with work. But...
  5. 95cbr331

    Back and with issues..

    So after a little break ive come back, had issues with the STI i bought and the Dealer...which is finally getting resolved. Anyways the mustang is back together and its not running so well....dart 347 w/ a HP stage 1 turbo kit. Had to replace the rockers, which turned into valvecovers which...
  6. 95cbr331

    mod help

    im stuck in the mobile mod and it doesnt give me the ability to change it back. if i could get my account reversed that would be great. thanks Posted via Mobile Device
  7. 95cbr331

    Dyno results- good and bad news

    So i made 427hp and 506 trq... i know this is low for what i have. But the motor is still new and didn't want to push it to hard and i was having a few issues. Still am having issues... im leaking oil out the intake i believe..there's oil on top of the bell housing and i think im leaking...
  8. 95cbr331

    fired up the dart/turbo build..

    its gnarly everyone. Im excited, still have a lot of work to do, but its a good sign it fired. needed some throttle to get it to fire up and stay running. going to adjust the timing but i'll do that when m closer to being finished. I want to be able to idle to kind of break the cam in. i...
  9. 95cbr331

    Dead CCRM??? Buzzing.

    turned my ignition on to set my base fuel pressure w/o car started and the ccrm had this annoying buzz... i do have fuel pressure..apparent because it leaked out an injector o ring. story is the harness got in the way during the swap and slices a section of the harnes... i soldered and...
  10. 95cbr331

    7qt pan equals...

    So this might be a dumb question but... if i have a 7qt oil pan does that mean i put in only 7qts of oil...?lol.
  11. 95cbr331

    D-day

    Ok guys in the next day or so i plan to fire the beast...:rolleyes: real nervous to say the least, and im in need of help with establishing a check list to pre- fire on a brand new motor w/ a turbo. Also what do i need to look for when i first fire it. the car wont be driven or even put...
  12. 95cbr331

    ASP Underdrives, problem.

    The Waterpump pulley from the ASP underdrive kit is touching my Romac balancer on the outermost tip... has anyone ran into this? why could this be?
  13. 95cbr331

    Quick question...??

    Im trying to wrap up my battery relocation and i wanted to make sure on a ffew connections. my plan is.. 1. connect the + 1/0 cable to the starter 2. Then from the starter(of the same pole as the + cable) to the fuse box with a 4 gauge wire(larger than stock.) 3. Then for NHRA legaity the...
  14. 95cbr331

    Bad day guys...

    holy ****ing hell is all i have to say.... spend all this money on this damn turbo kit and the header sits on the driver side motor mount, a good 1/4inch+ of interference. When i get up tomorrow Nate at HP better be ready this is ridiculous, might have to fly down there to make sure something...
  15. 95cbr331

    Brake Help

    K everyone i messed up when titling one of my previous posts, sorry. My problem is my Cobra MASTER CYLINDER (not booster, my bad lol) appears to have bitten the bullet. With some research i have found a cobra MC for sale for 130 w/ out the reservoir but its not available tell the end of the...
  16. 95cbr331

    3-inch exhaust

    Im starting to wrap things up with my project and I've been debating on which exhaust for ages,.. My combo is a Hp performance turbocharged dart 347, some say i should set 3 inch exhaust but i cant find any 3 inch catbacks. The turbo kit only calls for a standard catback exhaust and i really...
  17. 95cbr331

    cobra Brake booster?

    cobra master cylinder? Where can i find these, my local autoparts store cant get them (napa) w/o a hella long wait time. Have a leak that is running down my (new) Brake booster so it looks like i need a new one. Do these leak or could it be something running down from the resivor?
  18. 95cbr331

    Turbo Project Update

    So first off I'm going to say I'm the worst when it comes to keeping everyone informed and especially posting pictures. Recap: Building up my '95 cobra in memory of the person who inspired my mustang love and obsession... my dad. The goods: Dart "big Bore" 347 from CHP- motor combination...
  19. 95cbr331

    tuning solutions in WA?

    I'll hopefully winding up my build in the next couple weeks and im going to need a tune right away... who do you guys recommend to do some dyno tuning on a turbocharged dart 347? thinking myself... Blood enterprises- well known, heard they arent the freindliest or Horsepower Ranch
  20. 95cbr331

    Moroso Oil pan Clutch cable interference

    As stated my new 7qt moroso oil pan is interfering with the cutch cable where it attaches to the bellhousing.... there seems to be no way to get the retaining part of the cable seat in its location on the Bellhousing, even when filing the interfering points. Has anyone had this issue? how has...
Top Bottom
Back
Forums
Menu