Search results

  1. S

    1988 Mustang Gt

    Well I have to sell the car. I just don't have the time to drive it anymore. It sits in the yard. I hate to let it go it was a great deal, but I need a bigger vehicle to carry the family in. Sig has all of the details. looking to get $7000
  2. S

    Quesion about 94-95 maf sensor

    When I did my mass conversion last year I used the 94-95 maf, I recently purchased a C&L housing without the electronics in it. My question is can I simply use the electronics from the maf I have or should I find a sensor from a fox. Thanks for any help -Josh-
  3. S

    Beautiful 93 Cobra

    I was browsing the local craiglist and came across the ad for a 93 cobra have a look its beautful 1993 Used Ford Mustang SVT Cobra at Fast Cash For Cars in Raleigh, NC, IID 4663541 -Josh-
  4. S

    Need a little help please Raleigh area

    I need to get my car inspected and it doesn't have cats, anyone know of a place near raleigh or Lillington that will inspect. Thanks Josh
  5. S

    hesitation before 3000 rpm, awesome after

    when ever I take off from a stop, and just ease on the throttle the car just hesitates to go, it pops backfires and just plain wont go. It almost feels as if it is loading up on fuel. However once it hits 3000 rpm it picks up as if nothing were wrong. Also if I floor it from a stop it takes...
  6. S

    BAD Miss

    Yesterday I started the car to move it so I could mow the grass. I try to drive it atleast once a week or so. When I startd it it had a horrible miss at idle so bad it was pouring smoke, and then I couldnt get it to rev past 4K. So I bypassed my 6AL and just ran the coil, much to my shock the...
  7. S

    Hesitation at partial throttle

    Here goes When I drive my car, after it goes into closed loop, it hesitates really bad at part throttle. If I am at a stop sign and start to take off it starts bucking and popping and backfiring through the intake. I have checked all of the Vacuum lines and replace all with new. I have...
  8. S

    question about pistons

    I am going to apologize before hand on the lengthy post. The image above is a pic of the pistons in my motor, I dont know what brand they are or any of that good stuff. The only thing I know is from what I saw. They are 4.04" pistons with out valve reliefs, Can anyone Identify them? I...
  9. S

    Mass Conversion Complete

    I bought all of the parts individually, over the past 3 months. I got the A9l off of craigslist for $95 I got the MAF From a local salvage yard off of a 94 Town car for $50 The Harness I got from Interactive Systems & Technologies Mass Air Home Page for $48 shipped and the Adapter for the...
  10. S

    what size is the maf from a town car

    like it says. I bought one off of a 94 town car to do my mass conversion and when I measure it it is 76mm on the out and 84 on the in. Does that sound right? thanks -Josh-
  11. S

    Question about codes

    I am getting everything ready for my mass swap this weekend and wanted to see what codes were present with the SD comp KOEO 81 82 85 84 KOER 41 91 33 The guy I bought the car from removed all of the smog stuff including the purge canister, along with the vacuum stuff for the EGR...
  12. S

    Mass Conversion

    ok guys, so i have finally acquired all parts needed in my conversion A9l $95 1994 towncar MAF $50 conversion Harness from IST $40 Adapter to fit square end to cold air from Spectre $16 my question is what size is the meter on the town car because the one I bought is 84mm on the square side...
  13. S

    Car starts only under throttle

    like the title says, I can get it to start only if I have the pedal pushed down a little bit, it will cut off if I let off fthe throttle, I read the thread about car wont start but didnt see anything about starting under part throttle on a COLD engine, the post says for a hot engine. Any help...
  14. S

    Car Overheating (Please Help)

    I have been messing with this car all weekend, It started when my fan relay stuck on after driving and killed my battery. I got all of my electrical problems fixed, but I still cannot fix the overheating issue, I am going to change the thermostat either today or tomorrow. I drove it to work...
  15. S

    People with UPR Rear Control Arms

    Sorry for the Lengthy post: I am just trying to find out if anyone else has had problems with the Bushings from the UPR NON-Adjustable upper and lower arms. The Car I just bought has them on it and the original owner had to replace the bushings shortly after he had the kit installed, since I...
  16. S

    Pulled Codes

    I pulled the codes today, on my 88Gt, and this is what I got KOEO: 81 82 85 84 KOER: No Codes??? Anyone know what these are? Thanks -Josh-
  17. S

    UPR Lower bushings

    Ok, So Saturday, when I slid off the road into the ditch due to the rain and my ET Streets, I think I may have broken the bushings on my LCA's, I have the UPR Upper and Lowers, I called the place where they were installed and he told me that it would probably cost about $50 or so installed as...
  18. S

    Damn Rain

    So I was out driving around, and out of no where, the freaking sky just opened up, so I instantly slowed to 35, hoping to make it Home without incident, and then it happened the rear of the car just walked around to the front and well I found a mail box, After I just got done saying that the ET...
  19. S

    My First Stang, and I have a Few ?'s

    I was given an opportunity to buy this car, at an price I couldn't refuse, The person I bought from is a friend, and I had helped him with most the hands on work that was done to it. My ?'s are when he bought the car it did not have O2's so when we changed the stock intake to the Holley, we...
  20. S

    First Post, New to The Stang world

    Well, I just bought my first Stang yesterday, I knew what I was buying before I bought it. So far, except for the wipers stopping in mid stroke on the drive home, and the dash lights going out after filling up, It is everything I knew it would be. Just a quick list of things that I know about...
Top Bottom
Back
Forums
Menu