Search results

  1. BlueMonster65

    my hyd. clutch install

    with the demise of JMC I thought this might be useful for some other people who want to put a hydraulic throwout bearing in their early mustang. i purchased the 1400 series bearing from McCleod and the Willwood master cylinder as well. i made the hyd. line and bought a 5/16 rod end from summit...
  2. BlueMonster65

    few pics of my explorer rear disc brake setup

    thought i share this. the explorer rear disc brakes are cheap, decent and have a parking brake setup that i really like. however it is a bit of a challenge to install them on a early mustang. the tabs for the flex hoses needed to be welded to the housing, and i relocated the main flex hose to...
  3. BlueMonster65

    Need help with Explorer disc brake conversion

    So i finally ponied up for a 9" rear with explorer disc brakes and i assembled most of it last weekend, but i ran into a few unknowns. anybody know what parking brake cables i should get to connect the explorer parking brake to a 65 mustang cable. i just found out about the fox mustang...
  4. BlueMonster65

    Tasca Ford Show August 25, 2007

    http://www.warnerrobert.com/tasca.pdf Just wanted to let everyone know about this show, it's going to be big! We at LMMC-CT have setup a cruise to the show. to find out more check out our site at http://www.lmmc-ct.com/forums/showthread.php?t=48575&highlight=tasca you will prolly need to...
  5. BlueMonster65

    Mustangs Unliited Car show June 10th

    Anybody heading up to the MU show this Sunday June 10th? heres some info on it: June 10, Manchester, 30th Annual Mustang Spring Round Up, Rain Date: 6/17, Hosted By The Mustang Car Club Of New England, At Mustangs Unlimited, 185 Adams St, Approximately 1.5 Miles South Of I-84, At Exit 62...
  6. BlueMonster65

    5 leaf mideye and del-alum bushings???

    there's alot of suspension talk here and over on corner carvers. but i wanted to know if there is anybody using the combination of 5 leaf mideye and del-alum bushings. i just purchased them from mustangs unlimited and hope to install them soon. i am hoping that the del-alum bushings will be...
  7. BlueMonster65

    installation of ATI p600b sc complete

    well its been awhile since i posted here. i've been busy adding a p600b procharger to my 65 mustang. iprior to the supercharger the car made 220hp and 260lbft torque at the rear wheels ona dynojet dyno. i still have some serious tuning to do before i can get some dyno numbers but on my...
  8. BlueMonster65

    need interior pic's

    can some one post pictures of the GT cloth interior, i am trying to decide if i should "upgrade" to the leather that looks bad after 6 months. i have seen both the red leather and charcoal leather but no GT cloth interiors. according to the numbers there will not be very many. feel free to...
  9. BlueMonster65

    stupid BG tech support

    i called Barry Grant today to get some info on what carb they would recommend for a blowthru SC. application. and they told me they don't make one that will work with that setup. i said well both ATI and Paxton say a holley 4150 or mighty demon will work, so whats the deal. he said that a...
  10. BlueMonster65

    its time for BOOOOOST!!!!

    I modified a rally pack to hold boost and fuel pressure for my yet to be aquired supercharger. still not sure whether i'm gonna squeeze the ATI in there or take the easy way out and put a NOVI 1200. but either way. i'll need these to make sure everything is A-ok :nice:
  11. BlueMonster65

    fuel cell or modify gas tank?

    in order to add a procharger to my 65 i need to install a return line to the gas tank and increase the line size to 1/2". i was thinking about modifying the spare sending unit that i have like some people have mentioned however i have been to four auto parts stores and none have 1/2" steel...
  12. BlueMonster65

    rebuilding a holley 4160 to 4150

    quick question can the metering blocks and float bowls from my 600cfm list# 4776-2 style 4150 holley carb be used on the throttle body of either of my 600cfm List#1850-2 or 1850-3 style 4160 carbs? my 4776-2 body iis no good. and both of my 1850's are in tip top shape.
  13. BlueMonster65

    ATI Procharger

    At recent all mustang and ford carshow i was talking with a local rep for ATI about a P1SC for a carbuerted 302 and while he didn't have any carbuerated ford info on hand he did give me a bunch of info on chevys? and directed me to the ATI website where i discovered a kit for a carbuerated...
  14. BlueMonster65

    Thinking about AFR185's or 165's

    well i went to the dyno shop earlier this year and was surprised to see that my 65 only put down 213hp and 268trq to the rear wheels. desktop dyno sugested 320 at the flywheel, working backwards from my dyno numbers im at about 284hp flywheel with a 25% drivetrain loss. (its a C4 and 8") i...
  15. BlueMonster65

    suspension noise

    recently i have noticed a strange noise which i believe is some part of the suspension binding. i have new ball joints on factory UCA's and factory LCA's. i installed urethane bushings in the LCA's but that changed nothing. i think it could be the spring perch, which is new..er with poly...
  16. BlueMonster65

    20th aniversary 5.0 motor?

    a friend of mine has a dissasembled "gt350" aniversary mustang motor that he is trying to sell. i was wondering if this is a roller motor or flat tappet. he is not sure. also if there is any difference between this block and any other 302 or 5.0L block. for instance if it has a high nickel...
  17. BlueMonster65

    using the 4.6L for next restmod project

    i plan on using a 4.6L sohc with a centrifugal supercharger in my next project 1965 restomod mustang and i have a few basic questions regarding the 4.6L SOHC engines. 1. are the PI heads and intake or bullet intake compatiple with the 4.6L truck block. the reason i ask is supposedly the truck...
Top Bottom
Back
Forums
Menu