Search results

  1. S

    Spark Plug Question

    What should i set my Spark Plug gap too. I don't know if its the same as before or what. Its a 94 Mustang GT, but now its a 331 stroker carb, with AFR 185 heads. Should i keep the gap the same, or look into what the 85's gap was or look back to when the Mustangs were higher compression and...
  2. S

    Throttle linkage question

    I am finally getting my stuff back together. But my question is i changed to carb set up what kind of throttle cable will i need. Also this might sound stupid, but for the gas tank, because you have to change it so its down to like 8psi or something. I seen some things that look like a...
  3. S

    Cylinder Head Piston Question

    I just bought a set of AFR 185's and was wondering about my pistons. They are Keith Black Flat top, with two valve reliefs pistons. Will i have trouble with the piston and head clearance.
  4. S

    Cam Question

    Since i am going to a Carb set up, what about the cam. I see on CompCam website they have Carb Roller cams and EFI. What is the difference. Is their select few cams i can use. What would happen if i put a EFI cam in a carb set up. I don't want to do custom right now. But i was a cam with a...
  5. S

    Intake Question

    I am swapping over to carb and i don't know to much about Carb intakes. Which one of these is a better intake and why Edelbrock 71211 - Edelbrock Performer RPM Intake Manifolds - Overview - SummitRacing.com Edelbrock 7521 - Edelbrock Performer RPM Air-Gap Intake Manifolds - Overview -...
  6. S

    Eliminator Switch Chip

    I bought this JMS Chip & Performance Center about 6 months ago. Put it in the car drove 10 miles, has been sitting since. Going carb, don't need it anymore. 100 or best offer.
  7. S

    MAF and Injectors

    I have a Granatelli Mass airflow, I bought it not to long ago from a guy who bought it and it was still in the box with the wrappings. Its tune for 24lbs injectors and cold air. Granatelli Motor Sports 75955024-01C - Granatelli Motor Sports Mass Airflow Sensors - Overview - SummitRacing.com...
  8. S

    Cylinder Head Question

    I tried looking up the number for the heads i have but i can't really find what i am looking for. f3zm 6049 y302 heads I can't find the CC chamber for them. I found this Machined for 1.94" intake and 1.54" exhaust valve diameters, they are at the Shop going to get ported. I don't know...
  9. S

    I want to make my block roller

    I want to change my set up to roller. I have a block out of a 89 F-150. What do i need. I know i need some kit, or certain kind of lifters, or something along those lines. Please help, my car runs like crap and i am hoping changing this over will help. Even if it doesn't help i...
  10. S

    Quest for 400hp

    My new goal is 400hp Right now i have GT 40 aluminum heads ported Typhoon intake ported 331 stroker kit with keith black flat top pistons cold air intake Comp Cam with 282 duration 24lbs injectors 70mm throttle body 70 or 75mm mass air bbk equal length headers I imagine i will need some...
  11. S

    Torque Question

    I was wondering what the Typhoon intake with GT-40 aluminum heads should be torqued too.
  12. S

    What Size Push Rods

    Figured out the problem i was having was my cam. Put a flat tappet cam in now i have to convert it over to roller. if i use this cam COMP Cams CL35-328-8 - COMP Cams Xtreme Energy Cam and Lifter Kits - Overview - SummitRacing.com and some 1.7 rockers What size push rods will i need.
  13. S

    Car won't idle

    My car won't idle. The timing is on 10 right now and im sure of it. But it won't freaking idle. It dies at 1,000 rpm. It back fires, an i have fouled 2 sets of plugs. It sucks because i have been working on it for 2 months an finally get it to start, but i have to hold the gas down because...
  14. S

    please help car won't start

    Just got done with the 331 stroker build. Get it in the car an it won't start. It turns over but won't start. I completely removed the SMog, egr an conditioning, brackets and all. But now i am lost. What hose or plug goes on the back of the Fuel pressure reg. We have spark, we have...
  15. S

    Bolt Torque help

    How much torque lbs do i need for my rod caps. I got the 94 mustang book an it says 19-24lbs, but i assume that is for stock. The bolts are ARP bolts if that makes a difference. That little just doesn't seem right.
  16. S

    Spacer Plate ???

    Not sure what exactly it is called, but its the plate between the engine an the bellhousing, what is the purpose for that. I sold my old 302 an forgot to take that off. Is that what the starter bolts too. If i need it, what is it called so i can replace it.
  17. S

    Eliminator Chip Question

    question is about the Eliminator Chip threw JMS Chip Performance. When i order the chip it says someone will call for detail about my mods. So the question is, does it matter what Mods i have, meaning will they just program the chip because i have different cam an so on. Or giving them...
  18. S

    Emblem help

    repainting my car i took the emblems off. I was going to go with Cobra emblems but as i got them in the mail i noticed they didn't have the studs on the back an i didn't want to have to cover the holes up with bondo or something like that. So my question is where can i get the GT high...
  19. S

    A/C removal

    I am taking out the A/C pump all the lines an everything to the A/C on my 94 GT. Can i just get a shorter belt or do i have to get something to move the p/s pump up. If i have to get anything, can someone tell me what i need. I am removing the Smog an the A/C, figured would take some weight off...
  20. S

    cam and spring question

    I have a set of Aluminum GT 40 heads and i bought a bigger cam, i think the lift is around 540, will the springs hold up. If not can someone recommend some good springs
Top Bottom
Back
Forums
Menu