Search results

  1. W

    For Sale: Snow Stage 2 Boost Cooler and Safe Injection Module

    I purchased this kit a few years ago for my supercharger project but never installed it. It is brand new in the box and still has the plastic around it. I have instructions for them both. New they run for $560 for both. Looking for $250 OBO plus the ride. Have photos if needed...
  2. W

    Vortech V2SQ 94-95 Mustang

    For sale is a new Vortech V2SQ Kit 4FG218-020SQ that I bought a few years back. It is still in the original box and plastic. This kit inclused the Vortech BTM, water pump and crank pulleys, T-Rex in line, Vortech FMU and all hardware for to mount on supercharger up. The head unit is still in...
  3. W

    Would you buy a 69 351w block?

    There is a 69 block for sale that has been magniflux, sonic check, and hot tanked. I was wondering if the 69 blocks are worth the extra work that goes into them to convert to a roller cam. I appreciate any input.
  4. W

    Dart 331 or Production 408W

    Hey guys, I am going to start to gather all the parts that I am going to be putting on for a re-build. I was thinking of going with a Dart based 331 or a production 351w with a 408w stroker. I know it costs money to convert over to the 351w which is why I am not going with the Dart for the...
  5. W

    Should I sell the S-Trim?

    I am planning on re-doing the whole car and am set on setting a 351 (stroked to either 393 or 408). I will put AFR heads on it, a Trick Flow Series R, and a custom cam backed by a Lentech Street Terminator Plus. I was thinking about throwing the S-Trim on the motor but do not want to get too...
  6. W

    NMRA @ Atco

    Hey, wondering if any of you guys were going down to the NMRA's this weekend at Atco. Does anyone know what Vendors/tuners are going to be there?
  7. W

    Cost of Rebuild?

    I have a 2006 Mustang GT and was looking at blowers to put it on. Being that it only have 4000 miles on it, I don't want to slap the blower on and then throw a rod. What would it cost to have the engine rebuilt? I know the kits for the rods, crank and pistons go for about 2K to 2.5K, but what...
  8. W

    Could injectors cause car not to start?

    I did a heads and cam swap on my 95GT and the car won't start or idle. If we play with the timing alot the car will start up but we have to keep it up to 4-5 rpm to keep it running at all. The car is running really rough like it has a Extremely radical cam in it and it will stall out the...
  9. W

    How hard to degree and FTI Cam?

    Hi, I have an FTI cam made up and it says I cannot use the intakecenterline method for installing the cam. How hard is it to degree a cam to specific specs?
  10. W

    Help Car won't start... working on it now

    :bang: A buddy bought a cam off of ed curtis and installed it using the intertake centerline method and not degreeing it. When we try to fire the car, it will only run at 1600rpm and higher and is really rough. Please help as to anything we might be over looking
  11. W

    Mega Max Tranny?

    Anyone ever hear of megaMax Trannys out of Florida? A few people I spoke to rave about the transmission they make and they do not cost nearly as much as the "Name Brands" . They have many of their transmissions on ebay. Anyone have experience with these?
  12. W

    AODE will explode, need help!

    From my signature you can tell I will be making power on the outskirts of my AOD-E. I have a great transmission shop who will put all the parts in. Friend has taken his 10 second car there and no problems with the trans. My question for you guys is who has the most complete and best rebuild...
  13. W

    Which spark plugs with Vortech & Boost cooler?

    I am installing the heads, cam, supercharger and boost cooler next weekend running a 50/50 mix. I am wondering which spark plugs should I use with this combo. i am using GT40 iron heads..... also which gap should I use. I am not sure if the methanol changes anything so this is why I am...
  14. W

    11's or bust?

    With the mods I have in my signature, I will be installing the Snow Boost Performance Cooler with the 50/50 mix. Will I be able to hit 400 rwhp with this setup? Also, I am going to be installing 50/50 trade shock as strange adjustable struts. My goal is to get into the 11's running on Mickey...
  15. W

    Cam shaft Lube hurt blower?

    Ok, I am going to install the heads, the cam and the supercharger at the same time. My question is will the cam shaft lube from the 25 minute break in period for the cam gonna hurt the blower? I was thinking of not tapping the blower into the oil pan until after I change the oil after the cam...
  16. W

    H/C/I and supercharger at the same time?

    I am going to be installing heads and cam in to my car. I also have a V2-SQ trim supercharger waiting to go on. Should I do the whole project at once or should I do the heads and the cam first, and the supercharger seperate later? Thanks
  17. W

    LaRocca's Email address?

    I know this is simple but can anyone give me the email to LaRocca's because for some reason my computer won't load the contact info he has on his website. Thanks
  18. W

    Need a calibrated Mass air for S/C?

    I am going to be going with the 80mm Pro-M mass air meter while installing my supercharger. The care is going to be dyno tuned when completed. Do I get the Mass air calibrated for the S/C or N/A as I have been reading that tuners prefer the N/A meter to tune the car themselves. I am going to...
  19. W

    Torque Box Re-enforcements?

    I bought a set of torque box re-enforcements off of ebay and they are too big. The instructions say you might have to grind down the torque box to make them fit. Anyone else have to do this? Anyone buy re-enforcements that went right in? Thanks
  20. W

    Vortech Aftercooler

    I know someone might have asked this earlier but I did a search and did not find the thread.....Can a Vortech Aftercooler work on a 95 Mustang if you convert to a fox body throttle body setup? If so, does it take a lot of modification? Thanks
Top Bottom
Back
Forums
Menu