Search results

  1. 0

    Has anyone tried the Energy suspension tranny mount?

    I was just curious if anyone has tried this new tranny mount? Also the motor mounts? Do you see a real benefit from swapping these out compare to stock. Also is it difficult to swap the motor mounts on a mod motor? http://www.energysuspension.com/pages/whatsnew.html
  2. 0

    Eibach Anti-Roll kit - Which setting for the rear?

    Which holes did you use on the rear sway bar to connect to the rear endlinks? The forward one or the rear one? Also what is the real difference between the two as far as handling? This is on a 01 cobra and would like to get as much downforce to the rear wheels to help with wheel hop. Thanks,
  3. 0

    Stock Sway Bar Size in 01 Cobra?

    I was just curious if anyone knew what the stock sway bar size is in the 2001 cobra's? For Front and rear. When I say size I am referring to the thickness 26mm etc.. Thanks,
  4. 0

    Boost a Pump on a stock fuel system

    Can you use a KB Boost a Pump on a regular stock system? I have an 01 cobra and I am at the limits of the stock fuel system with Nitrous. Will the boost a pump work? Or do I need to change the pump and injectors and so on. I have a 100 shot dry system. I would like to get it to about 150. The...
  5. 0

    Are walbro 255lph pumps any good?

    I have heard that these pumps have problems, is this true? I was planning on putting one in my 2001 Cobra?
  6. 0

    Are walbro 255lph pumps any good?

    I have heard that these pumps have problems, is this true? I was planning on putting one in my 2001 Cobra?
  7. 0

    Looking for Anti-roll bar on a 01 cobra with IRS

    I have been looking around trying to find a aftermarket anti-roll bar for my 01 cobra (which has IRS) but I can't seem to find any that will go with my car? Has anyone found a company that sells a good anti-roll bar (swaybar) for the 01 cobra with IRS??? Thanks,
  8. 0

    X-mas gift just arrived. Carbon Fiber driveshaft for my 2001 Ford Cobra See Pics

    This driveshaft is sweet. I have 4.10's in my cobra... and I thought those made me go through the RPM's quickly. With this sucker on I am flying through the rpm's now... BIG SOTP difference!!! I know these are expensive, but if you can afford one it is the way to go!!! I have also notice a...
  9. 0

    Poll on the new MGW shifter, which handle do you prefer?

    Which handle do you prefer with the MGW short throw shifter. Blue or Red. Please give a reason on which one you like? Thanks,
  10. 0

    Carbon Fiber PST driveshaft Install ?

    I am getting a new carbon fiber driveshaft from PST for x-mas, with aluminum yokes... my question is should I get new bolts for the rear or just reuse the old ones? Does ARP make these bolts? Also does the tranny fluid need to be emptied to do the swap? If you have any other tips before I do...
  11. 0

    MGW Short throw shifter... Get one Now!!!

    All I have to say is go get this shifter now... I had a PRO 5.0 on my 01 Cobra and it is a good shifter, but felt a little notchy and caused a lot of noise and vibration. I installed the MGW shifter and installed it last night... All I have to say is Holy Crap. This thing has such short...
  12. 0

    Anyway to adjust the idle on a 01 cobra

    Was just curious if there was a way to adjust the idle on the new mustangs? Thanks,
  13. 0

    What is the best brand gas or fuel?

    What do you think the best brand of gas or fuel is?
  14. 0

    Checkout the new short-throw shifter from MGW

    This new shifter looks and sounds like a very good quality piece!!! Read thread.... http://www.fordpower.net/forums/showthread.php?t=105237
  15. 0

    Tremec 3650 tranny noise with load and when hot.

    I have recently got a new 3650 tranny put in from ford. It seems to run ok, however if you put a load on it around 3000-3500 rpm you hear what sounds like clashing/grinding a bit... it isn't really loud but you can hear it. Also after the car has been driven a bit and the transmission is really...
  16. 0

    Magnaflow catted X pipe clearance issues

    Well I received my magnaflow catted X pipe from partshopper. I got it all installed with no problems everything looks good. Only one problem. The Cat on the drivers side comes very close to the floor board. It isn't touching, but there is probably 1/4 inch of clearance. The passenger side has...
  17. 0

    Brand new 3650 tranny with 5th gear noise?

    Last week I got my brand new 3650 installed due to the dealer screwing up the TSB for the 3650. I was really happy with the Tranny til I got on the Freeway. 5th gear makes a noise which sounds like gear roll over... not to loud but loud enough to hear. My RPM's were about 2600. So I guess my...
  18. 0

    What are my chances for a new tranny from the dealer

    Is it difficult to get a new tranny after my problems I have had.. 1... complained about the notchiness They refilled the transmission fluid told me to drive it 500 mi. 2... went back in about same problem... told about the 3650 tsb They hassled me about it for 3 days...
  19. 0

    A lot of gear noise in Neutral after 3650 TSB fix

    Did you guys gear a lot of gear noise in Neutral when you got the fix done? When I push in the clutch pedal it goes away... I know you are supposed to have a bit of gear noise in Neutral but this is so loud you can hear it standing outside the car.
  20. 0

    Ford warranty policy on aftermarket parts

    I was wondering when the dealer put my Mcleod stage 2 clutch in they said it wouldn't be under warranty... which I can understand for the parts. You would think they would be responsible for the install though... which they say is not covered. Shouldn't the install be warrantied to make sure it...
Top Bottom
Back
Forums
Menu