Search results

  1. 95BLKGT5.0

    The saga continues round 2

    The saga continues starting problem solved now runs like crapola Thanks to all who have helped me with my starting problem. :SNSign: And special thanks to HISSIN50. :nice: The problem was one of the ground wires. I replaced all the battery posts and the neg cables and it started kind of...
  2. 95BLKGT5.0

    Starting problem.

    I have a starting problem. The car started fine then drove home 2.3 miles and when I went to leave! Nothing, nadda, Zilch It just clicked. This is what I have done so far. 1) Made sure battery was fully charged. 2) Battery connection: cleaned both posts and connections. 3) Cleaned Starter...
  3. 95BLKGT5.0

    Problems with the Dizzy and MAF

    I have been having problems with my car cutting out or miss firing. I ran a code reader and it gave me a pip fault so I replaced the dizzy with a reman. unit from NAPA. It worked for a day then it would not start, just cranked and cranked not spark at the coil. I had the coil and modual checked...
  4. 95BLKGT5.0

    Distributors

    Distributor opotions? My car cuts out every now and then so I replaced the coil and check all the ground wires but still cuts out so I think the PIP is going bad. There are 122000 miles on the distributor so I think the best thing to do would be to get a new distributor. What good...
  5. 95BLKGT5.0

    Cutting out.

    My car intermittently cuts out(not a simple miss fire) it does it while accelerating or just cruising. I checked all the ground wires and dist. and coil wires. All look good. Any one have any idea whats causing it.
  6. 95BLKGT5.0

    Fluidyne WTF, POS

    I installed my Fluidyne rad. Drove it to the Mustang round-up then back home. I did not drive it untill yesterday when I had a track day. The track is 5 miles away from my house so I now had a total of 25 miles on it. As soon as I got to the track the damm thing was leaking like a sive:mad: . I...
  7. 95BLKGT5.0

    Water wetter

    How much Water wetter are your suppost to use per gal of water. I drained my coolant so I can go open track racing and need to know how much water wetter to use.
  8. 95BLKGT5.0

    Retards at Ford Racing

    crapolaThe Gremlins got me and the retards at Ford Racing.:bang: First the Master cylinder outlet ports on the Cobra Master cylinder were different sizes than the stock MC. Small dia. in front and larger one in back. So I had to cut the ends off and switch the nuts and flare the lines...
  9. 95BLKGT5.0

    Cobra brake kit WTF?

    I installed my Cobra brake kit and when I went to install the Master cylinder the outlet ports on the Cobra Master cylinder were different sizes. Small in front and larger one in back. :nonono: Anyone else have this problem and what did you do to fix it? :bang: Can you get replacement lines?
  10. 95BLKGT5.0

    I failed track Tech inspect.

    I failed Tech inspect. <o:p> </o:p> My gas tank seal is leaking and I did not pass Tech inspect. Do you have to drop the tank to replace the seal or can the neck come off. I have an empty tank and the seal.
  11. 95BLKGT5.0

    Please let me use your cats.

    I failed emissions. No cats:bang: Anyone have some cats for long tube headers I can rent or borrow for a day. This is my set up: Stock motor AC deleted MAC cold Air kit MAC LT Headers MAC PRO Chamber O/R pipe MagnaFlow Catback Stock suspension Kirban AFPR FMS 3.55 gears Here are the...
  12. 95BLKGT5.0

    My parts list and my problem!

    :( I failed emissions. No cats:bang: I have all new suspension set up waiting to go on the car, new headlights, new hood, new Mach 1 chin spoiler and new paint job. I took a chance and did not pass emission Idle part. Now I need to get it to pass so I can have everything installed before I...
  13. 95BLKGT5.0

    Is there a How to For A/C removal

    I have been trying to find a how to for A/C removal. Can someone explain how to do a A/C removal. I had a rat chew my A/C lines by the dashboard, fried my A/C compressor. Now I need to remove everything because all the lines are shot. I already bought a new compressor, repair kit and...
  14. 95BLKGT5.0

    Help me build my Suspension $1500

    I have $1500 to spend on suspension. My Car is a street car that will see about 5 trips a year to the drag strip and about 5 trip to a road race course. So 80% street 10% drag race and 10% road course. I would like to lower it about 1.25 to 1.5 inches. The car has 100,000 miles and nothing done...
  15. 95BLKGT5.0

    Holy smoke Batman

    Holy smoke Batman I got off work the other day drove home (5 Miles) and my car felt like it was being very sluggish. I when I stoped I smelled something burning so I opened the hood :eek: and the A/C compressor was smoking :dead:. I have never worked on A/C so I hope my fellow stang netters...
  16. 95BLKGT5.0

    Fried A/C pully clutch

    I kept hearing a chripping sound that resulted in a little surge. Then yesterday when I drove home I smelled something burning. I opened the hood and smoke was coming from the A/C pump. The clutch was fried. Can this be rebuilt? How much will it cost? Can I do it? How much are the parts? And...
  17. 95BLKGT5.0

    My car got broke into.

    My car got broke into and they F***ed up the drivers door lock and damaged the area around the lock:uzi: How hard is it to replace the locks? Has anyone ever shaved there door handles and locks. My son got some googles from James Bubba Stewart and Chad Reed at the Seattle Supercross. The...
  18. 95BLKGT5.0

    My car got broke into.

    My car got broke into and they F***ed up the drivers door lock and damaged the area around the lock:uzi: How hard is it to replace the locks? Has anyone ever shaved there door handles and locks. My son got some googles from James Bubba Stewart and Chad Reed at the Seattle Supercross. The...
  19. 95BLKGT5.0

    Sound clips

    Can someone explain to me how to make a sound clip?:shrug: I just finished installing my exhaust. Ceramic MAC Long tube headers, MAC O/R PRO Chamber and MagnaFlows. :D It sounds so good :jaw: I want to share it with :SNSign: .:D
  20. 95BLKGT5.0

    Header gaskets

    Are the copper header gaskets that come with Mac headers good to use. I'm installing my LT headers and am wondering if there any good. I would like to finish the job today but all the parts stores are closed I think! I just have the copper ones.
Top Bottom
Back
Forums
Menu