Search results

  1. P

    6 speed in a 71 mustang?

    Hey guys, its been a couple of years since I have posted with this account, apparently I thought it would be easier at one time to create a new account rather than request my password. Anyway I am working on clearing out my garage so I can get working on my 71 Mach 1 again. Well I want to hook...
  2. P

    coil bind on a 351C

    i am goind from a 280H with .530 lift to a 284Xe with .584/.588 lift. the valve springs have about 3,000 miles on them and they came in the comp cams 280H kit when i got my motor rebuilt. so will i need to replace the valve springs and/or will i need to get the heads machined to recess the...
  3. P

    I need help building my 351C

    I have a 351C with 4v open chamber heads, 280H camshaft with .530 lift, forged flat top pistons. It has the stock connecting rods with arp rod bolts, and i have not yet upgraded the intake and it has a smaller carb on it right now. I want to get more power out of the engine and i am not sure...
  4. P

    spark plug wires 351C

    will spark plug wires for 351/400 M be the same fit as spark plug wires for 351C? Thanks
  5. P

    transmission help

    I have a C6 that i have gotten rebuilt and i had put about 3,000 miles on it. It shifted funny like it would only stay in 2nd gear for only a second and when it was shifting into third the rpms would jump up before shifting in gear. I just put in a new streetfighter valve body yesterday and i...
  6. P

    time for new springs and new stance

    I need some help trying to figure out what to do about getting new springs on my 71 Mach1. I want to get 620 coils up from(1 in lowering) and i also want to get new 5 leaf springs in the back but i do not know wether to go with mid eye or reverse eye springs. I have a new set of kyb shocks(...
  7. P

    what to do about valve body?

    I just installed a new TCI valve body and when i was ending the installation i find out that my transmission pan is too shallow for the bulging oil screen that the new valve body has. So i dont know what to do because i do not have a lot of money to spend on a new pan. Is there anywhere that I...
  8. P

    heater core help

    can anyone tell me how to go about replacing a heater core in a 71 mustang? thanks
  9. P

    replacing the heater core in a 71

    Does anyone have any links or anything showing how to replace the heater core in a 71 mustang? Thanks
  10. P

    taking out back glass in a 71 mach1?

    How do you go about taking out the back glass in a 71 Mach1. I need the glass out. does anybody know how?
  11. P

    Need a quick answer

    What is the 5 lug bolt pattern for a 71 mustang?
  12. P

    pics of 71-73 stangs with different wheels

    does anyone have any pics of and 71-73 mustangs with rims that arnt mag 500's or anything that you normally see on these cars. I want to get some new wheels but i am not sure what would look good on my car. And i want something different than what you normally see on the 71-73 stangs. thanks
  13. P

    help me find some rocker arms

    I need some new rocker arms for my 351C 4v motor. The stock rocker arms are held in by a 5/16 bolt (is that called pedestal mount rockers?) Also are the stock rockers 1.73 ratio? Anyway i would like to get atleast some roller tip rockers without having to get a stud kit. So does anyone have...
  14. P

    351C 4V Headers

    Are there any other headers for a better price beside Hooker Competition headers for $182 that will fit on a 351C 4V motor with a C6 floor shift transmission and power steering?
  15. P

    holley cfm formula?

    I was looking at my holley manual and i cam across the cfm formula ( cubic inches divided by 2) x (maximum rpm divided by 1728) x volumetric efficiency well i figured out what i said i would need for my motor a 351C 4v that is bored .30 over and i figure that my max rpms will be around...
  16. P

    what intake for 351C 4v

    I just got my 351C back for the machine shop and the motor is in the process of being put back together. I have forged pistons 10.5 compression and i have a comp cams 280H. What would be a good intake for my 351 with the 4v heads?
  17. P

    Flywheel for my 351C

    I need to get a flywheel for my 351C are all small block flywheels the same. Also were is a good place to get a good price on one. Thanks
  18. P

    getting my 351C rebuilt got some ?s

    I am getting my 351C with 4v heads rebuilt. I am going to get it bored .30 over and i am getting forged pistons. Im going to have about 10.5 compression ratio. 1st question is do you think that my reconditioned connecting rods will hold up good. Also i am not sure about what cam to choose. i...
  19. P

    how much lift out of stock heads?

    how much lift can my stock 351C 4V heads handle?
  20. P

    1 month of the 351C and its broke

    Well i took the stang to the neighbors house and he was checking out why the #4 cyl. was not compressing. well he checked the valves and pushrods and he concluded that it was the piston. so he is going to take the head off and check stuff out. Well if it screwed up the block that means one of...
Top Bottom
Back
Forums
Menu