Search results

  1. Trick98GT

    2006 GT, O/R X-pipe and check engine light

    Hey everyone. I have a buddy with an 06 GT and he just bought an offroad x-pipe. I'm going to help him install it, and it's been a while since I've been in the mustang game so I started doing some research on MIL Eliminators for the 06 and have come up with nothing. I did a search on google...
  2. Trick98GT

    XCal2...Getting FRUSTRATED

    Last friday, a friend and I took a trip down to Pompano Beach and we each bought an Xcal2 from Steeda. They gave us each one tune and said it would be a good base to start our tuning from. The only thing is, it seems as though i need the file that Steeda made in order to do anything...and Steeda...
  3. Trick98GT

    My impression of Steeda pullies and T/A

    Well, I just finished installing the Steeda pulley set and the timing adjuster...I'm impressed. I've got it running at 14* and the car seems to run smoother and when I hit it, it picks up noticably faster in 1st and 2nd. Haven't run it hard in third yet... I ran into a problem on the install...
  4. Trick98GT

    Noise from Differential...

    I'm in the middle of a trip that i drove 5 hours from pensacola to jacksonville FL and when i got here, my car started making this popping/clunking noise when the tranny was under an initial load(mainly starting in first or when I let off the gas and give it gas again). I thought it would have...
  5. Trick98GT

    Lets talk fuel pumps...

    So on my 98 GT, apparantly it has a different fuel pump than that of a 97 GT...Thing is, my car is in the shop getting checked out right now and i have a trip planned for tommorrow where i'll be driving about 1000 miles. I suspect the fuel pump is giving out and i'm looking to see if i can use a...
  6. Trick98GT

    Places around Pensacola FL that tune?

    I'm looking for a place relatively close to Pensacola, FL where i can get my car dyno tuned. Thanks for the help.
  7. Trick98GT

    Losing fuel pressure...

    I dont know what the pressure is when it's running, but i'm getting a miss and it's hard to start up. The reason i know i'm losing pressure is because when car is just turned off, there is immediately no pressure in the rail when i remove my fuel tap for my nitrous off the rail. Before, my car...
  8. Trick98GT

    Timing problem?

    On my old 98 motor, i started having problems starting it after i had a spark plug blow out on me. It used to start right up, and now it takes 2-3 cranks to get her running. Since then, i've swapped engines to a 99 4.6 and it does the same thing. Also when i run 87 or 89 octane, it detonates a...
  9. Trick98GT

    Rattling noise.

    I have a 98GT. Right before i did my motor swap to a 99 motor, there was a noise coming from the rear of the engine(flywheel area). I thought it would be fixed with the new motor, but it still persists. It happens at lower RPMs during acceleration and when the engine is under a load. It does...
  10. Trick98GT

    MAC shifter installed.

    The brown truck showed up to my house today :) I bought a MAC CNC shifter off ebay for 100 bucks and a Hurst T-Handle w/12v switch from a local performance shop. Install took about 5 minutes and man...what a difference from the stock shifter. It has adjustable stops and the throw is so short...
  11. Trick98GT

    NITROUS question

    I've got an NX wet setup with a 41 nitrous jet and a 24 fuel.(75 hp kit) My question is: I have the fuel solenoid pulling from the schreader(sp?) valve on the drivers side fuel rail. Will that be able to pull enough fuel/keep good pressure so I dont lean out? I was told both that I would...
  12. Trick98GT

    Installing Nitrous tonight...

    I finally have the time to install my NX wet kit with purge. I'm kinda new to the nitrous world so i guess i have a question or two... What kind of spark plugs would be ideal for this setup? It's a 99 motor(28,xxx miles), and a 75 hp wet kit. I'm currently running Autolite Double...
  13. Trick98GT

    Opinions on this shifter...

    http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7907030550&category=33736 It's a CNC shifter for T5 / T45 for 119.99 shipped on ebay. It's from Mustang Warehouse so i think it's legit and I wont get screwed...Any thoughts on this shifter? Adjustable stops and a short...
  14. Trick98GT

    Need a CARFAX!!

    I would really appreciate it if anyone has acceess to or can get a free carfax report... The VIN is 4A3AC34G4YE003127. Thanks in advance. -Patrick
  15. Trick98GT

    Finally got PI!

    So, a couple days ago, i got my hands on a 99 PI motor out of a junk yard here in town with 28,000 miles on it. only paid $950. So naturally that left me some money for some extra mods :). Mustang tuning catted X and an NX wet nitrous kit. I've got a friend who's helping me do the swap so it...
  16. Trick98GT

    99+ Lincoln Towncars

    Do they have PI heads?
  17. Trick98GT

    Any Ford Service techs??

    Here's the situation i'm wondering about. If i took my car to the ford dealer and had them put a helicoil in my #6 port, would they remove the head to do it, or would they do it with the head still on the block.
  18. Trick98GT

    Looking for LongTubes...

    I'm looking for the cheapest place to buy longtubes from. Brand doesn't matter. Thanks.
  19. Trick98GT

    MAF problem

    I've been running pig rich for a while now and I think i found the prob. I tested my MAF according to my haynes manual which says... "At idle, MAF should read between .02v and 1.5v and should raise to 2.0v at 60mph." So i tested it at idle and it holds a steady .01v...raise it to about 4000...
  20. Trick98GT

    Why the EFF is my Clutch pedal chattering?!?!?!

    Ok...So i just had a friend of mine with a 95 GT replace my clutch. Keep in mind, he's not just anyone...he has built many of the fastest mustangs around my town and works as a lead tech at precision tune. anyway... I had the king cobra kit in my car for a little over a year. tore though 2...
Top Bottom
Back
Forums
Menu