Search results

  1. StreetDreamsGT

    Does rick anderson use ford mostorsports cores for his cams?

    I have a cam I bought a little while back from some guy, he said it was an anderson N41 cam and it has N41 stamped on it. However, it also has "M6250 E303" stamped above that, please tell me I didn't get screwed over :(.
  2. StreetDreamsGT

    How can I test to see if my radiator is clogged?

    I'm still trying to diagnose my cooling problems and I wanted to start with the radiator because it seems most likely the culprit. If the top hose is hot, but the bottom radiator hose is cool that should mean the radiator is doing its' job right?
  3. StreetDreamsGT

    Curious overheating issue... possibly an electric problem?

    I installed an electric fan a couple weeks back and any time at all I could turn the fan on and cool everything enough that the coolant gauge would drop to the "A" in normal (yes I plan on getting a new gauge ASAP). Even when driving on the pkwy as long as I have my fan on the temp gauge stays...
  4. StreetDreamsGT

    Pics of GTs with bumper cut for tailpipes

    Hey guys I have a set of tailpipes brand new chrome for an lx but I have a GT (friend gave em to me). I want to see if it looks any good with the bumper cut for each of the tailpipes to come through, otherwise after inspection I'll just pull em and go back to dumps lol.
  5. StreetDreamsGT

    Good low budget entry level supercharger?

    I've been looking through the threads on here but can't seem to find a list of entry level superchargers. I'm not looking for anything extreme just a few extra ponies to have fun with, and I'm not looking to break the bank. I've seen kits on ebay around 2K is there anything cheaper?
  6. StreetDreamsGT

    Picking valve springs for my gt40p/N41 cam combo

    So the last engine I built I used the crane springs and the crane 2030 cam, it seems like the crane springs aren't really available anymore... back order from summit says the earliest ship date would be June. So which springs do I use? Most people say to turn to the Trick flows but I read about...
  7. StreetDreamsGT

    Overheated my car, now I need to know how to find the problem and what to check over

    Ok so I finally fix all my engine codes then I go and get myself into more trouble :nonono:. So here's everything that happened last night I finished class and stopped off to get gas. I have a stock engine, bumped timing 14*, full exhaust, 70mm tb and erg spacer, and a 76mm C&L CAI nothing too...
  8. StreetDreamsGT

    KOER codes 44 & 94, just one quick question about them...

    I have been slowly reinstalling the smog equipment back on my car, but haven't gotten around to switching my off road h pipe to the catted one. Seeing how I haven't installed the tube that leads from the thermactor system down to the h pipe that could be the reason why I have the codes right?
  9. StreetDreamsGT

    What color are the wires used to pull codes in a 92.

    The wires and connectors in my vehicle interface port were corroded, so I pulled them out of the plastic housing to clean them. However I forgot which ones go where, they're clearly labeled in the 88-91 wiring diagrams but I can't seem to find what color they are for my 92 can anyone tell me the...
  10. StreetDreamsGT

    Does a 180 degree thermostat really affect heat?

    Guys I've been having problems with my mustang's heat lately. I started the car and let it sit for 20 minutes, the top radiator hose is hot, and the hoses going into the heater core are hot. I checked the blend switch and it's working just fine (I reached under the dash and felt the door move...
  11. StreetDreamsGT

    Steering wheel/column problem

    I put a steering column from an 88' mustang into my 92. Everything fit no problem but I noticed before installing it that the wheel spins around without the key in it, it doesn't lock. Also, once it was put in there is a lot of play turning it back and forth, this is with the car off and the key...
  12. StreetDreamsGT

    Hp ratings for cars... new or old

    I started wondering the other day... are all hp ratings that are given out by car manufacturers at the flywheel? Or do they vary? There has to be a standard right?
  13. StreetDreamsGT

    Are the side skirts for a convertible gt different from a hatchback?

    Hey guys, I checked the threads on ground effects but couldn't find an answer as to why my ground effects wouldn't fit my lx. Then I just realized the ground effects I bought were off a mustang gt convertible... I guess they are different than a regular hatchback or a coupe?
  14. StreetDreamsGT

    Removed speed control servo now the car runs like crap...

    I was trying to get rid of everything from the cruise control... I pulled the servo from the driver's side fender, making sure to keep the vaccum line from the brake pedal hooked up to the spot where the servo connected to, but after doing all that the car idles like crap now. What gives? :shrug:
  15. StreetDreamsGT

    Repairing a small dent in a fiberglass hood..

    Hey guys, I've got a small dent in my fiberglass hood, about the size of a dime/nickle, I was wondering... how do I go about fixing it? It doesn't look deep enough to use matte and resin, the gel coat needs repairing but how do I go about repairing it?
  16. StreetDreamsGT

    Removing all the air bag sensors and wires.

    I recently swapped an 89 tilt column in and I want to remove all the air bag wires and sensors. I've heard there are two blue chimes under the dash and another 1 or two crash sensors in the front? I also want to remove the cruise control stuff so if anyone can tell me where everything is i'd...
  17. StreetDreamsGT

    Swapped an 88 steering column into my 92 what do I do about the wiring?

    So I swapped an 88 column into my 92, it looked like almost all the wires connected except for my horn and the airbag... but my wipers don't work after the swap, my blinkers work just fine though. There's two plugs that come from the horn but it seems like everything from the wipers are...
  18. StreetDreamsGT

    Brake upgrade info.... I want a rather cheap method for reliable improved stopping

    Now that i'm improving the acceleration and handling performance of my car I figured it's just as important to improve the deceleration. I want something that will help the car stop well...plain and simple. I've done some research so I know all my options... going to 5 lug with discs all around...
  19. StreetDreamsGT

    Restoring my doors/windows

    My windows take forever to go up and the driver side window even has some scratches on it. Also the doors rattle a bit. What all would I need to replace in order to get the doors to operate properly? I've found guide plates and window motors on 5.0 resto but I think I also need new window...
  20. StreetDreamsGT

    Buying tokico hp's should I get springs with them?

    I look around everywhere and I found a place selling tokico hps for around $280. When I look around I see a lot of packages for around $400 with a set of "tokico" springs for sale, or on ebay with a set of "lowering springs" that lower the car around 1.25". I'm trying to figure out if they're...
Top Bottom
Back
Forums
Menu