Search results

  1. scalder

    Which fuse??

    I have a friend w a 97 3.8 and he needs to know where the fuse is for the cig lighter...anyone???? Thanks!
  2. scalder

    Bogging, stumbling, pwr loss then all is fine...

    Whenever I start the car in the morning (actually just about any time) it idles fine for a minute then all of a sudden rpm's drop to around 500 and almost dies. It will stay there for a few minutes around 500 barely running then the idle will recover and all is fine. At first I thought it was...
  3. scalder

    Need a bigger garage...Challenger a go!

    Looks like it's a go! http://www.freep.com/apps/pbcs.dll/...D=2006606300319 Chrysler Group is preparing to announce that it has decided to go ahead with production of the Dodge Challenger Concept, according to today's Detroit Free Press. The announcement will be made at the Pepsi 400...
  4. scalder

    Bassani Mid's dyno results...

    Okay, just got back from the shop....install and dyno pulls only...no re-tune. Over my previous best these headers just made.. at peak.. right at 20 more rwhp and 14 mor lb/ft torque than my prv pulls. I know you want to see the sheet but my scanner is bad here. I can post those later but I...
  5. scalder

    Mass Air/Tune Question

    Switching from my C&L True Flow whatever to a JLT unit tomorrow....Should I keep the C&L MAM since that's what is was tuned with or ditch it and go back to the stock MAM? Pros/Cons??
  6. scalder

    VT Install/C&L Question

    Well I finally set the date for the install of my VT Stage II N/A Cams, springs and SCT Tune. My question is this…I’ve got a C&L Cold Air kit and MAF….would it make more power or be easier to tune with the stock pieces put back on or not? I hear random stories about the C&L stuff being hard to...
  7. scalder

    Doin' it tomorrow...90/10's....

    Well I was thinking about going adjustable but my car doesn't see much road time and I am all about building a straight line performer...sooooooo, anyone have any problems w this? From what I have read after doing a search, the ride should be fine w the front sway bar...which will be gone when...
  8. scalder

    Anyone w/ 70/30 Struts...

    How do they perform on the street?
  9. scalder

    another 1 of these...say I have 1K to spend....

    Chime in boys and girl(s)....what would you do...I have about a month until I hit the track again and HAVE to hit the 12's...my buddy's Z06 runs 12.4 and another's Anniv 03 Cobra vert runs 12.7...gotta join the club...since the 13'OH I have added 4.30's (from .10's), LCA's and the Fox 4 Cyl...
  10. scalder

    This thread is worthless w/o pics but...

    I just finished installing some Fox 4 Cyl front springs...the install was fairly simple and I really like the way the front end transfers the weight back towards the arse end now...HOWEVER, I'm thinking while I was there I should have slapped on some 70/30's or 90/10's... What is the consensus...
  11. scalder

    LCA install completed...have a question.

    Completed the LCA install this weekend and all I have to say is what a PITA! Not sure if other arms come assembled or not but these Mega Bite Jr's were an absolute whip! I do have a question though...before the install I had a very slight whine from the 4.30's at higher speeds...say 75-80...
  12. scalder

    Spring question...need advice please

    Well like I said yesterday I finally got some LCA's....now I'm thinking that as long as I'm tearing stuff down I may want to go ahead and replace the springs. While I would like to get a drop for appearance sake, I don't want my launches to suffer much. Do drag springs give a drop at all and if...
  13. scalder

    LCA install ?

    FINALLY got the LCA's...any tips on the install? Figure it's pretty easy but it never hurts to ask....if it matters I got Mega Bite Jr's....
  14. scalder

    How would you spend the $$

    Okay, working with say...600-700 bucks...what would you do with it?? Bassani Mid Lengths? Upper and Lower Control Arms and Springs? Cams? I know that I could only afford to buy the headers or cams with that kind of money, so I wouldn't have the cash for the install...and don't have the...
  15. scalder

    Bassani Mid Length install

    Believe me I searched...anyone here install Bassani's Mid length header themselves? Thinking about picking up a pair this weekend and was wondering what the difficulty level of installing these in comparison to full length headers was. Any info or install tips would be appreciated!!
  16. scalder

    Those with 4.30's, are they....

    noisy? Just went from 4.10's to 4.30 and they whine a little at higher speeds...say 75mph and up.... Besides that I love em!!!!
  17. scalder

    Stay 4.10 or move to 4.30's??

    I have a set of 4.10's that got messed up when I broke an axle this weekend. Should I stay 4.10 or move up to 4.30's?? They are putting things back together this afternoon so chime in quickly if you have an opinion...thanks!
  18. scalder

    Good and bad of it all in Ennis

    Quick and to the point...ran a new best at the Motorplex in Ennis this weekend going 13 flat but I guess the Nittos were to sticky for my axles...on the 3rd run of the morning I broke one or both...any suggestions on what I should get to keep this from happening again and how much $$?? Let me...
  19. scalder

    Line Lock...

    I wanted to pick up an SLP Line Lock but when I called SLP I found out that they were backordered until mid April. Anyone know of another place to find one of these or of another mfg? I understand the SLP is specifically designed for our cars and is an easy install. If I can't get that one, how...
  20. scalder

    What kind of times/improvement

    Hello my people. I just got back from the store. Ran up and got some Nitto 275 40 555R's and was wondering, given the mods and time in my sig, what kind of improvement I should see at the track. The 13.5 was run pretty much off idle and even with a little bog..and w/o the DS and Subs....please...
Top Bottom
Back
Forums
Menu