Search results

  1. Jason 302

    SOLD 03/04 Cobra T56 Tranny, Clutch, Flywheel, Bellhousing, Driveshaft, Etc

    I originally bought this to put into my fox but my plans have changed. T56 with upgraded with a 26spline input shaft and a B&M shifter. Centerforce 26spline clutch included, looks to be in excellent shape, also come with a steel 8 bolt flywheel that may need resurfaced. Original aluminum 03...
    • Jason 302
    • Thread
    • bellhousing centerforce clutch cobra coyote driveshaft sn95 t56 tko transmission
    • Replies: 1
    • Forum: Drivetrain Parts
  2. Jason 302

    Pro M Fuel Pump Hanger....thumbs Up.

    I started having some fuel pressure issues a few weeks back, so I figured I had delayed the fuel system project long enough. I ordered the following.... Pro M fuel pump hanger 40ft -06 PTFE fuel hose (probably only needed 35ft, but good to have extra) (12) straight hose end fittings (had extra)...
  3. Jason 302

    What The Heck Is My Fuel Pump Doing? (video)

    It's an Aeromotive 340 in-tank, only about a year old. I have it wired with one of their wiring kits which allows me to run it full-time so I can emtpy my tank, which is what I was doing. Seems like it pumps, then slacks off, then starts pumping like it should again. It ran fine for the first...
  4. Jason 302

    I Think I Have Some Fuel Issues

    So, quick info on the setup. Mildly built 306, Vortech V3 10/11psi, Aeromotive 340lph in tank pump, used 42lb injectors, Kirban FPR about 12 years old. Stock fuel lines, stock fuel rails. Car dynoed 480/470 at the wheels. Took the car to the track last night, and started getting some missing in...
  5. Jason 302

    03 Cobra T56 Into My Fox (speedo & Clutch Fork Position)

    I know this has been discussed before, but I just want to make sure I haven't missed any options as far as making my speedo work. For those who don't know, the T56 out of the 03 Cobra has an electric speedo, and the fox has a mechanical. For those who have done this swap, what option did you go...
  6. Jason 302

    Nitto 555r Dr. 245/45 Or 275/40???

    I know the proper size for my 17x8 '01 cobra rims is 245/45-17 but I've heard that Nitto's run small/narrow and I was wondering if it would worth putting a 275/40-17 on there instead? I know its designed for a 9" rim but I could certainly use the extra rubber since I'm putting down almost 500...
  7. Jason 302

    Expired New Sve 1 1/16" Gauges. Boost And Fp.

    I bought these gauges a few months ago for my supercharger install and decided to go with electrical gauges instead of mechanical. For sale is an SVE boost gauge and SVE fuel pressure gauge with stainless braided line. They HAVE NOT BEEN USED, they were only mounted in a pod for about 30 seconds...
  8. Jason 302

    Anybody Drive Their Power Piped Car In The Rain?

    So I have to take the car to the dyno tomorrow to get it tuned since the addition of the supercharger. Rain looks very likely. My car hasn't seen rain in about 8 years and I'm dreading it. My question is, with the power pipe putting the air filter and MAF down inside the fender well, should I be...
  9. Jason 302

    V3 Installed!!! Lots Of Pics

    Just installed a brand new Vortech V3 Si Trim last week, just been making some small adjustments to it to get it ready for a custom dyno tune next Thursday. Install went pretty well, biggest PITA has been getting the power pipe to fit correctly, and finding the proper sized belt. Aeromotive...
  10. Jason 302

    Siemens-deka Reman 42lb Injectors

    I've heard of Siemens-Deka and I'm sure they're leaps and bounds better than the knock off China crap currently on eBay. No way I'm buying those things. I wanted to find a good set of Bosch 42's which I believe came originally on the Lightning, but they're getting hard to find. I guess my...
  11. Jason 302

    Anybody Running An Aeromotive 16307 Wiring Kit?

    So I'm pretty excited because today I ordered a Vortech V3 supercharger. I also ordered an in tank Aeromotive 340lph fuel pump. I've been told the stock wiring harness isn't quite up to the draw that this big pump is going to pull. They sell a wiring kit, which stangTV used in this install...
  12. Jason 302

    SOLD Mavromont 17x8 Pony R Rims & Tires (4-lug)

    These are aftermarket 17x8 PonyR rims made my Mavromont Industries. General Altimax 245/45-17 tires. Four lug bolt pattern. They are in LIKE NEW condition! I bought these rims and tires brand new a few years ago. They have very few miles on them, probably only around 5,000 or so. Still like...
  13. Jason 302

    Sve High Performance Fuel System

    Has anybody tried this fuel system? I'm curious as to how much (boosted) horsepower it can support and what else is needed to complete the setup with some BBRC fuel rails. They're claiming 3/8" stainless steel supply lines, I'm assuming that's bigger than stock? The price is what really has me...
  14. Jason 302

    Did 5 Lug/4 Disc Swap, Brakes Are Weak

    Finally did the 5 lug/4 wheel disc swap on my car. Used the following parts.... 94/95 spindles JM Stainless brake lines up front 99-04 PBR dual piston calipers up front Gutted and plugged stock proportioning valve Ford Racing adjustable proportioning valve 94/95 GT Master Cylinder Stock fox...
  15. Jason 302

    Expired 96+ Front Spindles & Hubs (5 Lug ) $70

    I purchased these several years ago and never installed them. In good shape, bearings spin freely and have no slop or wobble to them. They were rattled canned black when I first got them. All the wheel studs appear to be in good shape as well. $70 shipped to the continental lower 48 states only...
  16. Jason 302

    Who Needs Drag Radials....

    ....when you can cut a 1.795 60' on street tires :eek:. NTR was hooking good last night and the air was cool and crisp. If somebody told me my car was capable of running 12.40's with street tires a few years ago I would of laughed. Tires are Firestone Firehawk 255/50-15 on Weld 15x8 Draglites...
  17. Jason 302

    First trip to the strip in 5 years

    Yeah...I've been slacking lol. I was happy with the way the car ran, but unhappy with the track. I waited at the front of the tech line for 20 minutes while everybody just pulling in behind me was checked right through. I didn't mind at first...but started to get a bit impatient. Then, after I...
  18. Jason 302

    Building a 69/70 351W block w/9.48" deck height

    I'm bored so I figured I would create this thread for those who are seeking to build a stroker motor out of an early 351w block. Feel free to add any additional info. The first two years of the 351 windsor was '69 and '70. These blocks featured a deck height of 9.48" and are considered the...
  19. Jason 302

    I'm having a new rearend built

    So after recently installing some new rear control arms and battle boxes, I noticed I have a considerable amount of slop in my driveshaft without any movement from the axles. My pops seems to think a lot of it is coming from the axle splines, but I think it has too much backlash between the ring...
  20. Jason 302

    Front coil-over users...question

    I feel sort of dumb asking such a newbie question since I've been in the game for a good while, but here it goes. I'm getting ready to install the following parts soon on my 93GT.... -Tubular A-Arms -Steeda Coil over kit -#200 coil over springs -MM caster/camber plates -KYB adjustable struts...
Top Bottom
Back
Forums
Menu