Search results

  1. crazynorwegian

    I think its time to give up :(

    I bought a set of mph 2.5 heads and vt stage 2 cams about a year ago, and still havent been able to put them in due to financial problems. I had high hopes for the stang but it was just too much money to get them installed and tuned. I was going to put them in myself but I cant be without a car...
  2. crazynorwegian

    ok, now I've seen it all

    so i work at a tire store, and i see a lot of stupid things people do to there cars. but, today I saw something that took the cake. it was a lowered is300 with a body kit that was held on with wood screws. It looks like he didn't touch the alignment after he lowered it so he was running some...
  3. crazynorwegian

    tire pressure monitoring system

    I was just wondering if anyone knew of any aftermarket tire pressure monitoring systems.
  4. crazynorwegian

    best boltons for my setup

    so since I live in california and most places will give me a hard time to install my cams, I decided to go with my original plan get off my lazy butt and install everything myself. now I will have an extra 1500 to spend on boltons. I am defiantly going to go with some lca's and sfc's but that...
  5. crazynorwegian

    what size injectors?

    once I get my heads and cams on, I'm thinking about putting a small 50-75 shot of nitrous on my car. what size injectors would I need to safely do this?
  6. crazynorwegian

    whats up with my cel

    so I dont have mil eliminators on my o/r h pipe and I've lived with having the cel on for the last 1 1/2 years. about 2 months ago the light randomly turned off, and hasn't been on since. i've also put over 1000 miles on my car since then. The light isn't burned out because it lights up when i...
  7. crazynorwegian

    cutting the bend

    I have a friend with a 03gt m5 who has a mac cai on his car. Ever since he's gotten it the cel has been tripped a few times. He finally got fed up with it, so I took a hack saw, and cut the bend off the cai to make it into a strait shot. After reinstalling everything, I took it for a test drive...
  8. crazynorwegian

    help puting together a headswap

    help putting together a headswap I'm getting ready to put stage 2 heads and cams on my car soon, and I want to make sure I have everything I need to perform the swap. I'm buying the stage 2 1/2 heads and stage 2 vt cams from mph. then if I cant find a pi intake manifold used, I'll buy one from...
  9. crazynorwegian

    need some help on spending some money

    so I'm getting a loan from my parents for $3500 to fix up my engine, and since my car has 152,000 miles on in now I thought it would make more sense to replace my entire engine with one out of a 98 cobra. I've been doing a lot of research on the swap, and have started to second guess if this is...
  10. crazynorwegian

    why is my car running so rich

    So for the last month I've been trying to troubleshoot a very bad stumbling problem. I changed the spark plugs, cleaned the iac, cleaned the maf, and tried changing out the coil packs. no luck. so I took it in and pulled the codes, and it the mechanic told me the passenger side front o2 sensor...
  11. crazynorwegian

    4v engine swap

    alright, well my parents are selling there house, and they are getting a lot more then they expected for it. so they're going on a spending spree, and I somehow convinced them I need a new engine for my car. the engine does have about 150k on it, so it has seen better days. Now here's my...
  12. crazynorwegian

    failed smog because of mil

    I spend hours today swapping my stock mid-pipe into my car because it was smog time. after I was done with the swap, i disconnected the battery for 5 minutes, to turn of the mil. after reconnecting it, the mil was off. I drove it around for about 10 min, and then took it to the smog station...
  13. crazynorwegian

    vibrations at higher speeds.

    After I did my gear swap, I get a humming vibration coming from under the car at speeds above 85mph. I kinda figured it was my ds, since its spinning a lot faster then it did before the swap. at 85mph now the ds is spinning = to almost 140mph with the 2.73's. is it normal to get these kinds of...
  14. crazynorwegian

    exhaust cutouts

    http://store.summitracing.com/eproduct.asp?N=120+%2D43867+%2D46762+305285 Has anyone used, or know someone who has used these exhaust cut-outs by mr. gasket. they are 1/4 the price of the electric ones, and still can be opened from inside the car by pulling a small lever. the only thing that...
  15. crazynorwegian

    finally put my 4.10's in

    after weeks of debating if i were capable of installing my gears myself. I decided that I did not have the time or the tools to do this. so I took all my parts down the a local shop, and had them install the gears, new bearings, and rebuild the trak-loc (I supplied all the parts). costed me...
  16. crazynorwegian

    problem after installing speedcal

    alright, so today I changed my oil, put a new airfilter in, and installed a speedcal. it was getting dark by the time I finished the speed-cal, so when i was done I started it up and drove down the road to test it out. the speedo wasn't moving. I'm assuming it was a loose connection, I'm going...
  17. crazynorwegian

    wheel hop

    In the last month, I've been experiencing some serious axle hop. Could this be a result of bad lca bushings? Before I changed out my shocks it was doing the same thing, but now its back. I think it might be time to ask santa for some mm lca's.
  18. crazynorwegian

    Steeda 4-Bolt Caster Camber Plates

    are these worth the extra money? whats the advantage over the 3-bolt?
  19. crazynorwegian

    shaker scoop on 98gt?

    is it possible to fabricate the mach 1 shaker scoop on a 98, and still use the stock hood?
  20. crazynorwegian

    gas smell from vents

    recently when ever I turn the heater on in my car I get a strong aroma of fresh unburned gas coming from the vents....should I be worried? If so what's wrong?
Top Bottom
Back
Forums
Menu