Search results

  1. RajunCajun

    Firewall smoothing

    Ive been smoothing out various parts of the car shaving holes and filling in dimples. thus far Ive known what most of the holes were for till I got to the firewall area which on my car didnt have anything installed on it (bassically a shell) Was wondering if anyone has any pictures of the...
  2. RajunCajun

    removing lower control arm balljoint

    Well got all my suspension off no problems was preety easy to break free. Im trying to determine what size the bolt holes are for the lower control arm ball joint assembly if anyone knows off hand? also if anyone has a good way of removing the original rivets ?
  3. RajunCajun

    Rebuilding Manual Steering Box

    Well got the tools out this afternoon and took apart the steering box and got everything apart except the two needle bearings that hold the lower part of the steering/ anyone have any ideas would greatly appereciate it. Plan on doing a full write up on how to in the near future
  4. RajunCajun

    Parts prep for Primer

    Im new to these modern paint & primer processes and was wondering in what order I need to be applying certain things to various parts and major body parts of my car. the primer im using is two part epoxy and what im mainly wondering is do I use body filler on the bare metal that has deep...
  5. RajunCajun

    Bellhousing Identification

    Today since it was raining decided to try to mate the 3 spd standard trans I recieved with my 1966 mustang and a bellhousing that was also inside the car. When recieved they were not mated but I just assumed they went with each other. anyways so I lined the top mounting holes of bell housing...
  6. RajunCajun

    Subframe Connectors

    Searched quite a few days for all info on here I could find and nowhere Have i seen anything like Im wondering about doing so I decided to post about it. Im building my own subframes somewhat like this "How-To" How-To Subframe Connectors Only reason I do not like there way is I dont...
  7. RajunCajun

    Ignition cylinder + no keys = my universal key

    Click dont ask just know it works this is the 7th mustang ive done it to without any damage to the surround or the electrical in the back only damage is to the tumbler area that you must replace regardless unless you want it hand rekeyed
  8. RajunCajun

    some updates on the 66 coupe

    got the drv side pan out in about an hour done way to many of them now found easiest ways of doin it heres link to the pictures i cant Img link them because they will unhook the pictures so pls just click link have plenty more if anyone wants more detail on anything just msg me im to...
  9. RajunCajun

    Taillight sockets

    looking for taillight sockets that will fit 67 shelby 67-68 cougar taillight assembly round 1-1/8" hole with a side tab had found this style thats dual contactor made for Rear tail lamp double contact assy that fits Ford products from 1973. 3rd wire on socket acts as ground any...
  10. RajunCajun

    free shipping?

    i was reading through a mustangunlimited mag. other day and saw that if you ordered above a certain # 300 i believe was the amount that they would wave shiping costs because you bought enough over priced stuff anyways so i went online to place my order got it up to 305 and it still says 60...
  11. RajunCajun

    Question about 66 Taillight Panel

    Im trying to figure out if its possible to make 67 Shelby Taillight Assemblies fit on a 66 Coupe yes i know the taillight panels are diffrent but has anyone done this to a 66 or 65? ive seen them on 67 68's with the addition of the fiberglass panel just was wondering if anyone has done this and...
  12. RajunCajun

    Question about R style Front Apron

    Im wondering how exactly these type aprons are bolted in? planning on using one without bumper mounts and with holes 66 Mustang Thanks Dave
  13. RajunCajun

    Project Vehicle

    Just found out about this site via a friend Pyrofighting, I have a few questions on things I want to do to my 66 Coupe First Im wanting to go with 67 Shelby/Couger Lens's and wondering if anyone has seen this done on a 66 and any links you might have or information on where to get the...
Top Bottom
Back
Forums
Menu