Search results

  1. S

    Just bought a 95GT and found some suprises

    Hey guys, I just picked up my first SN95, a green 95GT. It has a clean title and 101k miles. Mods are 4.10's, bassani cat x pipe, flowmasters, headers, and a pro50. I traded my 88LX convertible that had a salvage title and I repaired it. It looked great, and had basicaly the same mods...
  2. S

    Timing backing down on its own

    I recently got my Trickflow H/C/I all together, and am very happy with it. I have a problem with the timing backing down. I set it at 20* spout out initially, and after a day of driving the car, I checked the timing because it seemed a little sluggish. Sure enough, the timing had dropped to 8*...
  3. S

    idle and code help please

    I bought a bare shell EX-CHP for $200 and decided to put the car back together. It has TFS heads, Stage 2 TFS cam, and a TFS track heat intake on a stock Shortblock. The check engine light is on, and will come on about 10 seconds after I start the car....but when I start the car, it revvs to...
  4. S

    Replacing inner fender apron

    I already drilled out all the spot welds and removed the inner fender apron, does anyone sell them new or do I need to go get a used one? Thanks
  5. S

    Any idea why these would be inside an 8.8?

    A friend of mine just bought an 8.8 with 3.73's that needed a new bearing installed in it. While taking it apart I found 4 of those metal tabs inside. Never seen this before, does anyone have any ideas?? Should I just go ahead and do the bearing, put it in the car and see how works? Thanks!
  6. S

    Inline Fuel Pump install (GSL392)

    I just bought a GSL392 and am trying to figure out how to get it ann hooked up. I used this but I am still a little unclear: What color is the wire that I need to tap into that powers the intank pump? I went to Ronmorris.com and found what I think I need, a 90 Degree Duckbill Fitting...
  7. S

    Headgasket or rings???

    My car recently developed a problem after about 1,000 miles. I had my heads off to get resurfaced and new valve springs, and when I re installed them I reused my MLS head gaskets for the first time. The problem is that there is smoke coming out of the valve cover, just a puff every couple...
  8. S

    Please Help! Aftermarket fuel rails leaking...

    I recently bought a set of fuel rails and lines off Stangnet, after piecing them together and getting them on my car, the injectors will not seal and when i turn the key all the gas just leaks out onto the intake. WTF? This has turned into such a headache, hopefully someone can help thanks
  9. S

    please help with messed up idle!!!

    My friends 91 GT is having a few issues, that I am trying to fix but cant quite. It will idle fine most the time, except right after I start, you have to play wtih the gas pedal to get it to idle...then it will idle for a couple minutes, and die. I relearned the idle, set the TPS to .95...
  10. S

    headers for 5 speed conversion 68 stang

    i have a 68 mustang im trying to get some new headers they need to clear the clutch cable if you know of any please reply with the brand and part # thanks brandon
  11. S

    Got the 351 in my 67!! pictures...

    Well i got the 4 coats of paint down to bare metal and painted the engine compartment semi gloss black. I dropped in the 351 which is .030 over, has World Roush 200 heads, Custom ground Comp cam, 9:1 compression, Victor Jr, Demon carb...I want to put a blower on it eventually, that why its 9:1...
  12. S

    351w and Tremec 3550 into my 67

    I want to put my 351w and tremec into my 67, I know I need the headers. The motor is fresh, 9.1 compression, and has a supercharger cam (.556/.571 lift, 224/236 @.050 duration and a 113 lobe seperation. I would run a victor jr intake and a 750 carb. The ehads are world roush 200 heads(like the...
  13. S

    Just bought a 67 Mustang

    I just bought a 67 mustang, It has a rebuilt 289 with edelbrock intake, holley carb, and tri-y headers. the tranny I think is a C4 and feels like it has a shift kit. It has some rust, the driver side floor, the bottom of the 1/4's, and one spot under the back window. I paid $1150 for it...
Top Bottom
Back
Forums
Menu