Search results

  1. C

    302 distributor

    What is the best distributor to use on my 65 Mustang with a 347 roller block? I will be using a MSD 6AL. It will be driven on the street but is being set up for drag racing. Can I get away without The Vacumn advance for street use?
  2. C

    1965Gt Mustang Long Tube Headers

    What are the best 1 3/4" Long tubes that fit well with a 1965 mustang 347 c-4 manual steering? Thanks
  3. C

    front frame rail distance apart

    can someone give me a measurement of the distance between the front frame rails just before the firewall on a fox body. Thanks, Mike
  4. C

    Best intake for my 347

    I am looking into the RPM Air Gap or Victor JR and would like some opinions. Engine is a DSS level 20 with 9.4 compression AFR 185 Heads and the cam is a B-41 Anderson Ford Motorsport roller 228 duration Intake 236 Exhaust,The lift is .544 intake and .568 exhaust. It is going into my 65 Gt with...
  5. C

    New MSD Pro-Billet Dist #8455 94-95 Mustang

    sold
  6. C

    16 inch wheels on a 65gt

    I have decided to go with 16 inch wheels on my 65gt. My question is for people that have run 16 inch wheels on these cars. With a 16x8 on the rear and a 16x7 on the front what back spacing would be the best. My main concern is on the front with the control arm and ball joint being so close to...
  7. C

    Which tuners or chips will remove pats

    What is the best way to turn off the passive anti theft system on a 99 GT. Is there a hand held scanner/tuner that will do this or a chip that can be bought. Which brands are recommended. Thanks for any help you can give.
  8. C

    99 Gt no power above 4,000 rpm

    I finally made the jump from 5.0 mustangs to 4.6. But I am having trouble with the new ride. It has 118,000 miles and a 5 speed. It flat out falls on its face at 4,000 rpm and if i am at full throttle it wont go any higher but if i ease into the throttle it wil rev higher. No codes and it will...
  9. C

    Fox body rearend difference

    I did a search but did not really find what i need to know. What is needed to make a fox body rearend fit under an SN95? I know the housing is the same length, but can I use my 94 GT axels and disc brakes? Do the brake caliper brackets bolt up to the fox body? Will the ABS sensor attach...
  10. C

    how to remove the needles on instrument cluster gauges?

    how do the needles come off without damaging the gauges?
  11. C

    cobra gauge cluster install problem with volt gauge

    HI everyone, any input would be appreciated. I bought an instrument cluster out of a totaled 98 cobra for my 94 gt. now i know the wiring is different and i did not want to move the pins around so this is what i did to get around that. I removed the gauges and installed them into my 94 cluster...
  12. C

    installing gt-40 y heads, please help

    Hi, i am installing y heads on a new short block. My question is I have a thermactor threaded insert in the back of one of the heads (someone else installed it). Is there any way to to remove it intact so that I may move it to the front of the head, or am I SOL?
Top Bottom
Back
Forums
Menu