Search results

  1. A

    Should I scam the scammer?

    Here is the skinny: Ive been trying to sell this laptop on ebay. First time around, I get a scammer who wanted me to send the laptop to Nigeria and had a weak story, so I relist. Second time around, I get another scammer from Nigeria. This guy is better though. He sends me a fake paypal...
  2. A

    Autolite 24

    Pulled a plug today and it says Autolite 24 on it. Is this the correct plug for AFR185s?
  3. A

    Where can I buy a 1'' spacer for a systemax

    Anyone know? I cannot find this anywhere.
  4. A

    Removing lower intake

    I am swapping intakes and wish to know if there are any fluids I should drain or precautions I should take besides draining the coolant? Don't want to mess anything up.
  5. A

    Considering purchasing a used s/c

    Hey all. I'm considering buying a used supercharger on corral.net. The guy has plenty of positive feedback with big ticket items and I'm going to use my credit card via paypal if I do it, so getting scammed isn't really one of my concerns. What I would like to know is what kind of questions I...
  6. A

    X-Men movie = the big suck

    If you ever read any of the comics, you are going to be seriously annoyed with whomever wrote this script. They pretty much just did whatever they wanted with the movie :nono:
  7. A

    Can you be running rich but not have enough fuel volume?

    Trying to diagnose my high rpm dropoff. With the new engine, I upgraded to 30lb injectors, but have yet to install my new 255 fuel pump. A pretty knowledgeable builder suggested to me that a lack of fuel volume could be responsible. Thus my question, is it possible to show a rich a/f ratio but...
  8. A

    331 dino still very dissapointing, experts help needed

    331 dyno still very dissapointing, experts help needed Ok, recently swapped in a 331 stroker motor. Have a C&L Maf calibrated for my 30lb injectors, AFR 185s with FTI upgraded spring package, Performer RPM intake, and an FTI custom cam (Gross Valve Lift: .5728 / .5632; Duration 224*/ 228*) with...
  9. A

    Does this look like a fenderwell kit?

    I know that CAI won't do much more than dress-up an engine bay in most situations. I was curious if this would fit the bill for a fenderwell mounted CAI: http://cgi.ebay.com/ebaymotors/89-93-FORD-MUSTANG-5-0L-BLACK-COLD-AIR-INTAKE-W-FILTER_W0QQcmdZViewItemQQcategoryZ38634QQitemZ8059906263QQrdZ1...
  10. A

    New engine, A/F ratio is very rich, what are some common fixes or things to check?

    Title was a mouthful but it everything I want to know in a nutshell. Got the car on the dyno today and my A/F ratio was very very bad, in the 10's bad. Dropping the fuel pressure down to 34psi or so allowed me to jump into the 11's, but still very rich. Besides messing with the fuel pressure or...
  11. A

    DYNO RESULTS from my 331 swap

    Ok, took my car to the dyno today over at Lamotta in the Central Florida area. I just recently swapped a stock block stroked to 331 with forged internals, an FTI custom ground cam, AFR 185s and a performer RPM intake. Base dyno pull put me at 277.5 max hp/ 315 tq, definately not the...
  12. A

    Parts store fan same as Ford OEM?

    I'm looking into replacing my fans and I was just curious if the parts store fan for a SN94-95 would be as powerful as the ones put on the car by Ford? I'm just curious cuz I can get one from Autozone new for $66, but I want to be sure it puts out the same CFMs that junkyard OEM ones do.
  13. A

    Quick electric fan CFM question

    Hey all, Quick question. Did a couple of searches and found lots of recommendations and such, but I was hoping for some hard figures. I know the taurus, SN 94-95 and Mark VIII fans are all good, but what is the CFM rating of each? Is the SN and the Mark the same or close? Thanks alot!
  14. A

    Anyone have any mustang engine pics?

    Trying to put together my top end and could really use any pics or detailed info/website concerning the grounds and vacuum lines/sources on the back end of the upper intake area. Even if you just have a pic of that area on a stock stang, it'd make my life much easier. So far I have one braided...
  15. A

    Is the harmonic balancer supposed to be this difficult to remove?

    Ok, I took the big bolt out of the center, I removed the four bolts and took off the pulley. Using the balancer removing tool from autozone, I put the bolts in to two of the holes to secure plate and then threaded that onto the big bolt that has a cap of sort on the end. Then, using an impact...
  16. A

    Cam installation difficulties

    So I'm trying to get my block together in time to make an appearance at FFW in Orlando this upcoming weekend. Currently, I have the cam in using the dot-to-dot method, *though according to the grind sheet I need to degree it which I really have no idea how to do*. With the cam, I got two dowell...
  17. A

    How do I measure push rod length

    OK, I have the tool from summit. Now all i need to know is how to use it. No joke, if anyone can spell out in plain english all the details, that'd be a life saver.
  18. A

    EGR question

    I've read through a good many of the EGR posts but had a few specific questions. My car has no smog pump and since I'm putting a new longblock into the car, I was considering removing as much clutter as possible. Without a pump, is my EGR system working anyway? Previously i had capped off the...
  19. A

    Looking for how to on installing springs on my heads

    I purchased some upgraded springs from FTI for my AFR 185s. Is this something I can do myself in the garage or no? I'd appreciate any info.
  20. A

    Do I need some sort of EGR spacer?

    Hey all, in the process of putting together my longblock. I have a 70mm accufab TB to mate with my Performer rpm intake. I would like to completely ditch the egr system with my new stuff. Question is, can i mount the TB directly to the upper intake or will i need some sort of EGR delete plate to...
Top Bottom
Back
Forums
Menu