Search results

  1. TheBocSez

    Brakes Grinding in Reverse...Why??

    Have an 00 GT with 03 Cobra brakes up front. When in reverse, there is disctict grinding sound coming from the front brakes. I have noticed that it is louder in the interior than the exterior of the car and that it only happens in reverse. When brake pressure is applied it goes away. It is...
  2. TheBocSez

    Question about headlights

    My wife bought me a new set of headlights from 50resto for my 00 GT. My question is this. On my Fox, I had to put a bead of silicone around the lens seam to prevent condensation from entering. Are the headlights on the later body style as bad and do I need to do this also or did Ford improve on...
  3. TheBocSez

    New to the 4.6 and have some simple questions

    Hey, Just sold my Fox last month and bought a 2000 GT. I have a few simple questions for now and probably many more as time goes by. 1. The car is a 5spd. What transmission do I have? Want to get a MGW shifter but dont know which one. 2. How do I know if the engine is a PI or not? 3...
  4. TheBocSez

    Question about 96 vert.

    Just sold my Fox and Im looking at a 1996 Vert with 59k on it. My questions are these: What are any known issues with 1996 engine or other wise? What is the road noise in a vert like in the later models? My 91 was pretty loud on the highway. I have heard the later models and more quiet...
  5. TheBocSez

    Sold my vert today, she will be missed.

    Broke down and sold the vert today. Shes going to a good home and she will be missed, strange how selling a car you put so much time into feels like more than a car when its gone. Just a final tribute thread I guess. From its humble beginning: To its departure: Time to...
  6. TheBocSez

    Injector Harness Question

    Just wondering if the injector harness from a mass air Stang is interchangable with all years? Meaning, can I used the injector harness ( from 10 pin to all connections from that point) from a 89 thu 93 on my 1991?
  7. TheBocSez

    Operating Temp for AOD

    Anyone know what a normal operating temp for an AOD is? I am running an AOD with an Edge 9.5" 3200 stall. Today while I driving, I noticed that the trans temp gauge showed to be about 190* I believe. I am running an aux cooler, but I could go bigger. Is this a safe temp or too hot...
  8. TheBocSez

    Cars at the dyno. Anyone wanna guess the #'s?

    Finally scrounged up enough cash to take the Stang in for a dyno tune. Anyone care to take an estimate at the numbers? 302 Probe forged pistons, compression 9.2:1 Windage Tray C.I. Custom Cam CNC Ported E7 Powerheads Crane 1.6 RR Typhoon Intake 75mm TB/EGR FRPP 42's Vortech V1 SC...
  9. TheBocSez

    Question about installing a chip

    Heading off to the tuner tomorrow for a dyno tune. I stopped in today to pick up a chip with a basic tune to get from the house to the shop with the LMAF and 42's. My question is this. I removed the computer and cleaned the J3 port. The tuner said to clean it till I see copper, an article I...
  10. TheBocSez

    How do you replace a convertible latch assembly??

    The right side latch on my 1991 Vert broke. The handle still moves but it seperated from the J hook assembly. I think I can repair the one I have but if not, it will need to be replaced. I see a large allen head bolt in the frame, is that all that is holding the assembly in? If not...
  11. TheBocSez

    Supercharger + AOD =- What gear?

    I have a 91 Vert with the following mods: 302 E7 Powerheads Typhoon Custom Cam 1 5/8 shortys 2.5 O/R X AOD 3200 Lock up Stall Lentech Street Term VB 4.10's Vortech V1 SC Waiting to be installed: Powerpipe LMAF 42's SN95 Fuel Rails 7" crank pulley 3.12 SC Pulley The...
  12. TheBocSez

    Great Use for a FMU

    http://cgi.ebay.com/ebaymotors/Vortech-12-1-FMU-w-Hoses-Clamps-Turbo-Hondas-Mustangs_W0QQcmdZViewItemQQcategoryZ33553QQihZ012QQitemZ220102695019QQrdZ1
  13. TheBocSez

    Got my DCC and a different method of mounting the temp sensor.

    Got my DCC controller and installed it over the weekend. Seems to be working great. My fan shroud covers the entire radiator and I was having difficulty finding a way to mount the temp sensor since its supposed to be outside of the shroud. I contacted Baskin and he suggested this alternate...
  14. TheBocSez

    E7 Powerheads vs. Aluminum Heads, What would I gain?

    I am currently running the following: 302 E7 Powerheads - CNC Ported Crane 1.6 RR Camshaft Innovations Custom Cam 520/520 lift TMoss Ported Upper/Lower Stock Intake 70mm MAF 19's AOD / Lentech Street Terminator / Edge 3200 Stall 4.10's I am thinking of going with a small 5-6 psi...
  15. TheBocSez

    What is this strange sound in fuel rails.

    I was adjusting my fuel pressure when I noticed what sounded like a vacuum leak in the area of the where the upper/lower intake meet and around the #1 cylinder. Yes, the vacuum line that goes to the regulator was plugged! :D I finished adjusting the fuel pressure and put the vacuum line...
  16. TheBocSez

    Perfect hose for bypassing the heater core on your Fox

    Can take credit for finding this hose p/n cause I found it on a search. I gave it a shot and its the perfect solution. Hose part number at Autozone is S-4354. Ran me about 8.00. Its a pre-formed U shaped hose. Needed to cut about 1" off of the end. Here are some pics of it installed. Hope it...
  17. TheBocSez

    Dumb C&L Question.

    Upgraded to 24lb injectors and changed the sample tube, but didnt pay attention when I removed the 19. Does the angle cut portion of the sample tube face the front (air filter) or the back (TB)? Yeah, Im a knuckle head. Thanks for the help
  18. TheBocSez

    New Fuel Pump Install Question

    Installed a brand new Walboro 190lph pump today. The install went smooth and now I have a question. I drained all of the fuel out of the tank, replaced the pump and reinstalled the tank. I have not yet put gas in the tank, when I turn the key on the ignition, I dont hear noise at all...
  19. TheBocSez

    Preping block surface for new head gaskets?

    -------------------------------------------------------------------------------- Ok, the heads are off the car and will be sent to a machine shop to be magged, cleaned, and resurfaced. What is the best way to clean the block surface? Also, when I removed the heads, I thought for sure...
  20. TheBocSez

    What are the chances that the head could be cracked?

    I had an overheating issue that resulted in detonation and a blown head gasket. I nursed it home, bout 1/2 mile and will be replacing the head gaskets this weekend. I was wondering what the chances are of a cracked head as a result of this? The heads are Iron E7 Powerheads on an Stock...
Top Bottom
Back
Forums
Menu