Search results

  1. AirWolf87

    Bad hesitation.........please help!

    Last night my car developed a bad hesitaiton on the highway. At low rpms under load it would buck like it was missing but no code. Today to took it for a drive and its not as bad, but in low rpms i can still feel it, and while it smooths out at higher rpm's it still runs rough and it is down on...
  2. AirWolf87

    How heavy of a flywheel should I get?

    Im getting a new clutch in my 96 GT, so while im at it, i want to put in a lighter flywheel. but i dont know much about flywheels. How heavy is the stock one and what weight do you guys recommend for my new one? Also, how do i know if i need a 6-bolt or a 8-bolt? and it has almost nothing to do...
  3. AirWolf87

    Are there any tuners for 96-98s????

    There are all these hand-held tuners for 99+ Mustangs and i never see any for my 96....are there any at all?
  4. AirWolf87

    Which side is bank one?

    I got a code a few days ago, pulled it and it was P0133 (upstream heated O2 sensore slow response- bank 1) I already got the o2 sensor, just waiting on the rain to go away to change it, but before i do, which side is bank one?
  5. AirWolf87

    Pleeeze Help!!! Mach 460!!

    Ok let me describe my problem first. About a week ago my rear lows shut off on me and cant get them to work again. the ones in the doors work great and all the highs are good....just the two rear woofers. I dont know how to start diagnosing(sp?) because i dont know anything about the system. Sop...
  6. AirWolf87

    Mach 460 help....need knowledge.

    Ok let me describe my problem first. About a week ago my rear lows shut off on me and cant get them to work again. the ones in the doors work great and all the highs are good....just the two rear woofers. I dont know how to start diagnosing(sp?) because i dont know anything about the system. Sop...
  7. AirWolf87

    What gives 98GTs 10hp over 96&97?

    Straight forward question. Over the past two years ive learned a lot about NPI mustangs, but i was thinking about this today.....what gives 98s the extra 10 hp that they are rated at? is it advertising or something real? cuz my 96 could use those extra 10 ponies
  8. AirWolf87

    PI Intake Swap done....ran into a few problems...need some openinons

    Ok well, the car is back together and overall the intal was pretty painless and had no problems. The only thing that happened was that wen i pulled the old manifold a little coolant must have dripped into the #4 spark plug hole. I changed all the plugs this morning before putting the new...
  9. AirWolf87

    Do i have to drain the coolent out of the whole engine for a PI intake swap??

    Straight Yes or No answer. The shop manual sais to drain the whole coolant system but i dont see how i need to drain any more than the radiator. how did you guys do it? trying to save time
  10. AirWolf87

    Ignition wires....any suggestions?

    well, as long as im going to have my top end apart for the PI intake swap, might as well change the plugs and wires while i have great access. Any suggestions for good wires???
  11. AirWolf87

    If you have done a PI intake swap (NIP heads) pleeeeze help me!!!!!!!!

    If you have done a PI intake swap (NPI heads) pleeeeze help me!!!!!!!! I finally cracked the POS intake on my stock 96GT as long as i was swapping it, i wanted to do the pi conversion. but i dont know much about it other than the general info. If anyone has a write-up of what i need to do or a...
  12. AirWolf87

    Why arent there any 3" exhausts for mod mustangs???

    Why arent there many 3" exhausts for mod mustangs??? hey guys, the thread "Weld-in flows vs. CatBacks" got me thinking..... I grew up around f-bodies. all my cousins have em (im the rebel of the family.lol. and the joke, but anyway...) they all have 3.25"+ pipes on em. it looks straight up...
  13. AirWolf87

    WTF is a "Advanced Timing Resistor"??? Check this out....shed some light.

    hey guys I was looking around on car domain at some 96 GTs like mine and i read this kids Mods list and saw something that i was completely unfamiliar with. One of his mods was an "advanced timing resistor" I left him a msg asking him about this and this was the reply i got. "Ok, the...
  14. AirWolf87

    How do I take my guage cluster off??

    the weirdest thing i have ever seen happened to me today. I driving down my block doing 30 or 40mph and to my horror watch my speedometer rise to 60, 70, 80, 90, 100......then spikes and goes all the way around :shock: I have never seen this before in my life!. Anyway, now I stopped, turned...
  15. AirWolf87

    HELP FAST!! Where can i find an ignition wire to tap??

    Im hooking up 2 guages and i got everything hooked up and running, except i need to hook them up the the ignition so they are only on when the car is on.....where can i find one of those wires??? I looked under the dash and couldnt tell where any of those wires go...i dont want to start cutting...
  16. AirWolf87

    How do i pull my comp.

    Hey guys, im trying to install a A/F guage on my stang and im trying to find the wire to tap into for the signal. I read on here you can tap onto one of the pins in the comp. Ive never pulled the computer before...how can i pull it and where would i look for the pin #s?
  17. AirWolf87

    you CAN bolt on a PI Intake man. to a NPI head!

    Just read on the depot that you can bolt on a PI intake mannifold to a NON PI head and it is good for rediculous gains. IDK if anyone else has seen this but i think its big. Being one of those kids that just cant dish out the cash for the heads, this mod is very realistic. this guy got almost...
  18. AirWolf87

    Need help installing guages!

    Hey guys, a friend gave me an A-pillar guage pod that he bought for his stang and desided to sell the car before installing them. They are both APC guages. One is an A/F ratio guage which im pretty sure i can instal, the other is an Oil Temp guage. I have no clue how to intall that. The...
  19. AirWolf87

    Bent shift fork????

    this is the story: I was messing around racing one of my friends and i powershifted 1-2 and when i powershifted 2-3 i missed the gear :nonono: . now the shifter is realy far forward. 2,4,R gear are a little more upright and 1,3,5 are reeely far forward like the knob is almost touching the...
  20. AirWolf87

    Help out a 5.0 novice?????

    Hey guys, Ive been a mustang owner for a little while now and recently a good friend of mine bought a 5.0 LX. Its a very nice car in great shape. Anyway, heres my questions. Ive owened a mustang long enough to get pretty educated, but i own a 4.6, so i dont know too much about 5.0s. My question...
Top Bottom
Back
Forums
Menu