Search results

  1. 6

    Dash pad or windshield first?

    I have always thought glass first, but the body assembly manual has me questioning myself now. What works for you guys?
  2. 6

    9" rear end from Galaxy too wide, right?

    Too wide for a '67? There's one on Craigslist in my area for $300.
  3. 6

    Need to create 1/4" square holes in the

    inner door panels of my '67 to mount the lower door grilles. It is supposed to use the plastic inserts in the door, which the grilles and then screwed into. Yes, I could just drill holes and screw them directly in, but it looks like the inserts may provide a little backing to the hollow part...
  4. 6

    Pertronix/stock tach/resistor wire help?

    I have previously installed a Pertronix (the first generation) Ignitor and a Flamethrower coil. That setup didn't like the resistor wire from the ignition switch, so I bypassed it. I would now like to install the factory tach that I acquired (not OE on my car) and had repaired and calibrated...
  5. 6

    Help w/ tape for door trim?

    Putting the car back together after paint, and I need to replace the thin, black, double-sided foam tape that went between the door opening (along the roof) and the stainless (or chrome, I'm not looking at it right now) channel that the door opening weatherstrip sits in. Does anyone happen to...
  6. 6

    Gauge ideas?

    I have swapped a tach dash into my '67, but I want the oil pressure gauge and ammeter back. I also want a very clean, stock looking interior. Has anyone done a spiffy install of accessory gauges that blends with the stock interior that could post a picture or two? I have a console, so under dash...
  7. 6

    67 coupe - rear defogger install Q

    In my ongoing quest to add factory and/or dealer options to my plain jane coupe, I scored a rear window defogger off of eBay. I have the defogger unit & trim, wiring and a switch (looks like it attaches under the dash, has three prongs, and can be rotated into three positions. So here's my...
  8. 6

    Cleaning seat tracks

    I'm reupholstering the front buckets, and want to clean and lube the seat tracks. Apparently the bolts that mount the track to the floor also serve as stops to the roller inside the track, and they look pressed in. For those of you that have done it...is is worth it to take the tracks apart...
  9. 6

    67 overhead console

    I'm putting the overhead console in my coupe that didn't have one...so a question for anyone that has one from the factory -- does the front bracket go under the headliner, or on top of it? I've got the whole interior along with headliner out now anyway so it's just as easy one way or the other...
Top Bottom
Back
Forums
Menu