Search results

  1. R

    Mice!

    My car can sit for long periods of time and it seems that some mice have taken up residence in my 65 and do not pay rent! Is there anything I can do to deter them from hanging around? I do not want to poison for fear they will die in the car somewhere. I actually heard some fierce chewing...
  2. R

    I need a LH/Driver side spindle!

    Can anyone direct me to a website or give me some information as to where I can buy a driverside spindle? Thanks!
  3. R

    Sloppy steering

    Hi everyone I have an issue with my 65 "wandering" on the road with real sloppy steering (manual). What are some of things I need to look for or replace? Thanks!
  4. R

    Cable to Hydraulic clutch conversion

    Hello All I installed a T5 from my old 93 stang into my 65 a couple years ago. I went with a cable clutch, but have had difficulty with routing it because of my headers and it has melted. I'm thinking I'd like to switch to a hydraulic. Can anyone provide me a website or instructions for...
  5. R

    Lowering 65

    Hi everyone, I'm sure this a redundant thread, so if you can point me to one that helps or a website, that would be appreciated. I would like to lower my 65 1 inch all around. What is the best way (economical, but don't want quality to suffer) to get this done? Where are the best...
  6. R

    Hydraulic clutch question

    Hi everyone Wanting to switch from my cable clutch to a hydraulic. I see kits for around $400. Is there a cheaper way to go? Can I go to the junk yard? Can it be from any car? Thanks for any info!
  7. R

    2005 Saleen

    Hi everyone I usually post in the classic forum, but had a question for you late model guru's. I just bought a 2005 Saleen (NA) and was curious as to exactly how many of my exact car have been produced. I understand that Saleen is producing around 2k of these cars (I assume this is the NA...
  8. R

    Got some pics of the 65!

    Hey everyone, Got some pics of the 65 I've been working on for the last year and a half. I've replaced the engine and tranny, made some suspension mods and worked on the interior. The next step will be getting the exterior the way I want. This whole project has been a learning experience...
  9. R

    Vacuum issues....

    I've been having vacuum issues since my rebuild. I cannot find any leaks in the seals of the intake or carb. I hook a vacuum gauge up the the intake (port where old C4 tranny connected) and while at idle the gauge reads around 15. When I hit the gas, the gauge jumps up. Is it possible that...
  10. R

    Fuel pressure?

    I bought a Holley mechanical fuel pump recently that is too much pressure for my carb. I bought a regulator for the needed adjustment. The question is, if I decide later to add a larger cfm carb will I need to increase fuel pressure or is this unrelated? I know different carbs may need...
  11. R

    Do I need to port my new intake?

    I will probably be adding an Edelbrock Air Gap intake to my setup. Will I need to port it to get maximum performance out of my heads, etc.? I'm learning as I go with this build and based on my limited experience, I can't imagine that the intake will mate perfectly to my heads and give top...
  12. R

    Carb help

    Hi everyone, My engine had been running fairly well even though the carb probably wasn't adjusted perfectly. The car ran strong and had little to no smoke out the exhaust. I changed my stock fuel pump to a Holley not to long ago. I recently noticed what seemed to be my accelerator sticking...
  13. R

    Installing CD player....

    Happy Holidays everyone! I want to re-locate my CD player so that it's closer to the shifter. I would like to mount the player perpendicular to the ground in a custom console I'll be building. Question is, will any CD player work at this angle or will I need to find one specifically for...
  14. R

    Mustang pics....

    Hey all, Can somoene point me to some web sites with pics of classics mustangs? I'm really looking for modified classics (restomod--restified--whatever). I'd also like to see any that you guys/gals may own on SN. :nice:
  15. R

    Supercharger?

    I'm looking to buy a supercharger. Any recommendations? Paxton? I see that Paxton claims 35%-55% increase properly tuned. Anyone here have this and get this kind of HP? How much $$$ do these go for? Would this work well with my setup? I only have 100 miles on the rebuild now, but I think...
  16. R

    What kind of radiator should i buy?

    Hey all, Could anyone give me suggestions on what to buy for my setup? I have the stock rad on there now and my recent rebuild has been overheating (new block, heads--the other mods I had on previous stock SB). Any decent vendors or brands? I'm not looking to break the bank, so something...
  17. R

    Torque specs for intake?

    Can someone tell me the torque specs for an intake manifold on my 65 coupe? I have a chitty Chilton tech manual that doesn't have it listed.... Thanks for any help!
  18. R

    Roller rocker madness....

    Hey guys/gals I have Probe 1.6 roller rockers that I've been "attempting" to adjust. I bring the #1 cylinder to TDC (I know it's TDC 1 and not 6 cause I feel a gust of air on the up stroke over #1 plug and can see the piston at the top) and adjust both rockers. I adjust by moving the push...
  19. R

    Digital gauge instrument panel?

    Anyone know where I could find a digital gauge cluster for my 65 coupe?
  20. R

    Vaccuum leak....need help!

    I have a 65 coupe (see sig) which I recently put a 306 ci with all mods listed below. This car has no power steering, no power breaks and a T5 tranny (cable clutch). The car runs relatively well (although I haven't driven her hard during break in) and idles fine. When giving it gas the...
Top Bottom
Back
Forums
Menu