Search results

  1. C

    thinkin about supercharging(v1-A trim)

    I can get an entire used v1-A trim kit for a grand canadian its on my buddys car right now. Includes 30 lb injectors, 3 gauges and all the hardware etc, good deal? its set up for 5-6 psi right now I was told its good for about 50 hp but I wanna upgrade the pulley to run 9 psi how much gains...
  2. C

    went to the track =D

    Went to the track this weekend and my best time was a 12.6 @ 107 mph with a 1.70' 60' thats with all the mods in my signature and a 150 shot of nitrous. Coulda gone a few tenths faster but I had a short somewhere for my wot switch as I burnt out 2 switches. I drove the car 2 hours to the...
  3. C

    klotz 108 octane race gas

    Hi im going racing in a week so I bought 2- 5 Gallon drums of this stuff but my friend told me its leaded(cant see anywhere on the drum that says leaded or unleaded) and it will clog up our o2 sensors(efi cars) is this true? or can I run it no problem, 91 GT here with nitrous, thanks
  4. C

    couple combo questions

    hi!! Im going drag racing in 2 weeks and just have a couple questions, here is everything I have done to the car: 14.2 @ 93 mph last yr just gears and slicks basically this yr i have all these things done to it plus the nitrous, just curious how deep into the 12s i can make it: -Edelbrock...
  5. C

    fuel pressure gauge under the hood

    Hi I have a 91 Mustang with a 5.0L (mods in signature) and I wanna run a fuel pressure gauge for my adj fp regulator and I wanna run it off my shrader valve but I have my fuel line for my wet kit plugged into it already, I wanna run a gauge in between there can anybody help me? link me show me...
  6. C

    Pulled codes need help!

    Hi, the idle was starting to surge outta nowhere to the point where the car would die if i let it idle, bumped up the idle upto 1000 and everything seems fine now but its running rich, my buddy behind me can smell the fuel and see black smoke coming out of my exhaust when im on the gas. Pulled...
  7. C

    tps voltage wire?

    Hi im in the process of installing a zex programmable tps switch(wot switch) but I need to know which wire from my tps sensor is the voltage output lead? thanks if anyone can help me out.
  8. C

    edelbrock intake gasket install..

    Hi i need to know if the black sealant built into the gasket goes against the block or against the intake? thanks
  9. C

    Mini starter install, small wire attaches to??

    hi just trying to install a mini starter along with bbk long tubes and the instructions arent very discriptive, for the small wire it says "use new wire in kit to engage the solenoid switch on new starter" so it goes from the mini starter to where exactly? positive terminal on the battery? need...
  10. C

    Edelbrock performer 5.0 lower/head gasket?

    Hi im looking for the lower to cylinder head gasket for a new edelbrock performer 5.0 efi intake i just bought, having a hard time finding the part # just wanna know if anyone can help me out, thanks!
  11. C

    lakewood driveshaft loop

    hi i have the custom lakewood driveshaft loop designed for 87-93 mustangs installed in my car. Will it work with an aluminum driveshaft or will i hafta buy a special driveshaft loop? Just something I thot I seen somewhere b4 if anyone has any input. thanks
  12. C

    msd cap & rotor for pro billet dizzy

    hi i have a 8582 pro billet dizzy and i need a new cap & rotor for it, in the msd cap& rotor kits on ebay is has the stock rotor with them but i need a special rotor anybody know where i can find it? part #'s and links would b cool if you have them thanks
  13. C

    stock dizzy gear with msd pro billet dizzy?

    like the topic says i bought a used msd dizzy but its missing the dizzy gear, will my stock one work just fine or should i upgrade to the bronze gear? thanks!
  14. C

    where to buy lower control arm bolts?

    longtube o2 sensors? where can i find some? hi im about to take off my lower control arms and replace em with a set of bbk's and i was wonderin if someone can link me to where i can find some new lower control arm bolts so i can just have em handy incase i gota cut or break the old ones out...
  15. C

    cold fusion nitrous jetting chart?

    hi, i lost mine so i have no idea which jets are for what hp, wet kit, if anyone can help me out id REALLY appreciate it, thanks!:hail2:
  16. C

    which plugs for nitrous?

    I'll be running a cold fusion 100hp wet shot, gonna put my timing back to 10*, I have et drags, subframe connectors, upper/lower beefed up control arms, which plugs should I be running for the nitrous? I herd autolite's but I can't buy them in my city so if someone could point me in the right...
  17. C

    nitrous for my fox

    Hi im about to buy nitrous for my car, the motor is basically stock, the mods I have are: 255 lph walbro fuel pump frpp 3:73 gears with trak-lok rebuild frpp king cobra clutch msd tfi coil, frpp cap& rotor, frpp 9mm plug wires pro 5.0 shifter subframe connectors hypertech module a/c and...
  18. C

    rivetless door handles?

    hi I have a 91 GT and im lookin for some rivetless door handles, I found some on ebay but the guy wont sell to me because I live in Canada eventho I was going to ship them to the US anyways which is 30 mins away so can anyone link me to a site where I can find some, it would b a big help. THANKS!
  19. C

    Couple questions about my combo..

    my plans are as follows: Street Heat Intake Comp Cams 268 Xtreme Cam Kit .512 lift (like a f cam) comes with lifters n pushrods GT-40 Heads King Cobra Clutch 70mm MAF 65mm TB or bigger??? 19 lb injectors or bigger? 3:73 gears already installed anything else I mite consider?? Im...
  20. C

    re: distributor rattle

    when I revv up the motor with the throttle the dizzy makes a weird ticking noise and when i let off the gas at idle it doesnt make that noise. My friend told me it might be a dizzy bearing gone bad? any other ideas? Thanks
Top Bottom
Back
Forums
Menu