Search results

  1. PhLoBuS

    Tank wont go bolt up properly...

    Basically since the cold weather is mostly gone I am trying to put my fuel tank back in on my 1990 GT. For some reason the bolts are not reaching the hole very well and there is a lot of tension on the straps. Any tips or tricks would be appreciated and also is the filler neck bolt 8mm?
  2. PhLoBuS

    SVT Calls... (pics)

    Well after all my posts here about my 5.0 I probably wont be doing much of that anymore. I finally after a few years of wanting a Lightning finally got a deal I could not refuse. 2004 Ford Lightning with 14k miles... I couldn't pass it up. Here is some pics of my 5.0 and Lightning. The 5.0 is...
  3. PhLoBuS

    Problem with Fuel filter hose

    I can get one of the fuel filter hoses in just fine. The input I think (one on the passenger side) will not fit once it reaches the lip on the filter. I got the other one just fine. I tried warming up the hose with hot water to give it some more flexability. No luck. Should I try an adapter or...
  4. PhLoBuS

    Car just doesnt want to work anymore =[

    It all started about 2 weeks ago I got home pulled in the driveway shut my car off like always. Get in and was asked to move my car in the street by my mother so I said in one minute. I went out started the car and it instantly shut off. I tried a few times and was wondering what was wrong. I...
  5. PhLoBuS

    MSD Coil difference

    I bought an MSD 6AL Ignition for my 1990 Mustang GT and now I want to purchase a MSD Coil. Either going for the Blaster II or Blaster III but I just wanted to know what the difference really is between the two. I noticed through Summit there is 4 different Blaster II coils you can order. One for...
  6. PhLoBuS

    Electric Fan question

    I am looking to get an electric fan for my mustang and want to get a good quality one. I hear good things about flex-a-lite but I want to know what you guys think. Also what model of the electric fan? Let me know, thanks!
  7. PhLoBuS

    Can it handle a supercharger?

    I was curious what I would need to upgrade/change on my car for it to be able to support a supercharger. If so how much PSI? My engine has 100k miles on it, would it be strong enough for a low psi supercharger? Let me know, my current mods are in my sig.
  8. PhLoBuS

    Shiftkit coming... what brand?

    Just what the title says, I am getting a shiftkit within a week but I am not sure which one I should go with. I am getting my AOD transmission rebuilt and want a shiftkit put in with it. Since I am sure some of you are experienced with shift kits I thought I would ask here :nice:
  9. PhLoBuS

    Idle and check engine light problems, help plz =[

    Recently I have been getting a really strange idle on my car. Usually it sits at a nice 750rpm and stays there. Now its either there randomly or at a 1000+rpm and not being steady at all. Rpms likes to jump around and I notice that the amp meter for my battery randomly drops down alot. And...
  10. PhLoBuS

    Getting shift kit, few questions...

    I am going for a Transgo shift kit for my 1990 aod mustang. How exactly does the shift kit work on an aod, what it does is provide quicker and harder shifts? It says it "Manually holds 1st, 2nd, and 3rd to any RPM" how would I be able to hold the transmission to a certain rpm without a stall...
  11. PhLoBuS

    Intake Gaskets, please help!

    I need a new upper/lower intake gasket for my trickflow street heat and also want to get two gaskets for my lower intake to the block. Would this be the right one for the lower? http://store.summitracing.com/default.asp?target=sitemap2.asp&N=400098 This for between the upper and lower? Why...
  12. PhLoBuS

    Antifreeze leak after lower/upper intake install

    So I have a coolant leak after installing my upper/lower intake and new TB. Does trickflow have a lower intake gasket I can use instead of Black Permatex? I have a upper/lower one but not for the bottom of the lower. I guess I will have to take everything apart AGAIN, for like the 5th time...
  13. PhLoBuS

    Vaccuum Line, picture included

    I just need to know where this vaccuum hose supposed to go. Do I even really need it? All the others are connected and I know this was connected before I took everything apart. Check the picture and let me know what you think. Picture
  14. PhLoBuS

    Check Engine after intake install?

    Alright so I installed TF upper and lower intake along with a Accufab 75mm TB. I started it up last night seemed fine a little rough but ok. Check engine light is on and I am not sure why. Any idea?
  15. PhLoBuS

    Charcoal Canister hose issue...

    I just want to know where the two hoses from the Charcoal Canister go. I started my car up and had a little smoke and it had a smell on the passenger side of the engine bay down near the headers. I am thinking some fluid got on there and was just burning it.
  16. PhLoBuS

    Injectors LEAK! HELP!!

    Well, I am getting quite annoyed by the injectors leaking so much fuel. I simply put in a new trickflow upper/lower intake and they leak? Why? Its only two of them 2nd to last and the last one, one on each side. I have used a mallet and hit them down and still, the fuel just flows right out. I...
  17. PhLoBuS

    Gas leak? Why??

    Alright so I recently installed: -Trickflow Street Heat Upper Intake -Trickflow Lower Intake -Replaced a bunch of old vaccuum lines -Accufab 75mm TB I recently finished installing everything, made sure everything was tight even stuff I have not touched recently. I go to fire up the car...
  18. PhLoBuS

    Drill size on TF Oil fill?

    I have TF Valve Covers and I received my Oil Fill kit, now what size drill/drill bit do I need for it?
  19. PhLoBuS

    Oring for fuel rail....

    Alright so basically I need an oring for the fuel rails where they connect... there is 2 on each and I have 3 and cannot find anywhere to get a 4th. What should I do or what should I use? Anything will help @ this point.
  20. PhLoBuS

    Upper intake, cant torque it! Help!

    Okay, So I have all the studs in for the upper, all electrical plugged in and everything else is fine. Now I have a 90 Mustang and a Trickflow StreetHeat upper and lower intake. I simply cannot torque down two of the studs because I cannot even get a socket in there. If you are standing...
Top Bottom
Back
Forums
Menu