Search results

  1. 6

    Caster adjustment issues

    I'm having some problems with getting caster set at 3 degrees positive on the right side of my car. The left side was done without any issue, however the right side is proving to be trouble. I have these parts on the car, G/West tubular upper and lower arms, Cobra Automotive roller spring...
  2. 6

    Head gasket?

    I have a Keith Craft built 331 stroker in my clone. The engine has less than 2000 miles on it and has never overheated or even approached overheating. After one season of summer driving I installed a MassFlo EFI kit during the winter months. I was shocked to find that I had a head gasket failure...
  3. 6

    Electric lock and window problems

    Yeah, a couple of little problems with both installs. The Electric life window kits are installed and with the Hotronic switches work, however, it looks like I will have to make some adjustments to the window in order to seal correctly against the weatherstripping. A small gap had appeared at...
  4. 6

    Power window switch install details

    I finished up most of the install Sunday afternoon, I haven't tested the window motors in the doors yet, that will be a little later this week. The Hotronic switches are really nice, I purchased the long shaft version, but I think the regular version would have worked fine in a 65 or 66 door...
  5. 6

    My new fuel injection ECM bracket (Big photos beware)

    I found that I had limited access to the ECM due to the way I installed it the first time around. I am in the process of adding power windows and a keyless entry system and decided to re-make the bracket and provide room on it for the new parts required of the other installs. It is based on the...
  6. 6

    Santa came early to my house

    And left these beautiful things for me. A little bit of polishing here and there and they be ready to go. Has anybody tried the sealant that Zoop makes? I'm wondering if it might be a good idea once polished that a sealant would be a good thing. Once installed, they would be pretty hard to...
  7. 6

    JME install completed

    I finished the installation of the JME six gauge cluster this week. I used the Autometer Colbalt series gauges, I liked the 270 degree sweep of the gauges. I used electric rather than plump the oil line into the car. This speedometer is electronic and required the use of a VSS in order to...
  8. 6

    Electronic speedo question

    I have been looking at the choices available for replacing the gauge cluster with a six gauge panel. Some of the Autometer speedometers I've been looking at are electronic and require a sending unit for them to operate. I have a GearVendor overdrive in the car and it required a sender to be...
  9. 6

    Updated photos, dialup users beware!

    Other than a few minor things to take care of, I'm done. Well at least until the winter when I'll start something else. Here are a few photos of the completed car, there are more at my Car Domain page. .
  10. 6

    New shoes, finally

    I have been waiting for what seems like forever to have these installed on the car. A huge improvement over the styled steel wheels that were there. We tried to fit 245/50 tires in the back, but it was just too tight, so 225/50s all around. These are Vintage Wheel series 50, 16 x 8...
  11. 6

    MassFlo EFI install complete and on the road, photos, dailup warning

    I finished the last few things this morning and decided to take it out and see how it works. All I can say is Wow. The combination of the EFI, camshaft replacement, and higher stall convertor have completely changed the car. The engine responds to the slightest touch of the throttle and just...
  12. 6

    Nearly completed MassFlo EFI install

    Here is a photo of my nearly completed MassFlo EFI install, just the radiator and some cooling system parts remain to be installed before I can start it up. I am having a custom aluminum radiator being made at a local shop, I've had him relocate the mounting brackets so I'll have more...
  13. 6

    EFI plumbing

    I installed my fuel pump, filter, and all but one of the fuel lines this weekend. Scroll to the bottom for the photos, http://www.cardomain.com/memberpage/597572/7 Installation of this kit is moving along very well, if it weren't for the overdrive installation going on at the same time I...
  14. 6

    EFI install, progress made

    I bolted the intake in place this week and have connected nearly all of the electrical components. I will install the supply and return fuel lines this week I hope, after I have installed the fuel pump and filter. There are a few pictures here, http://www.cardomain.com/ride/597572/7
  15. 6

    Cam lube required?

    I am ready to install a new cam in my stroker this morning. I open the Comp Cam box and find it does not have any cam lube. This is a hydraulic roller XE274HR cam, do roller cams require the lube like flat tappet cams?
  16. 6

    EFI conversion progress

    I all but finished the support I made for the EFI computer. I mounted the computer and all of the other associated parts to it and then fastened down the wiring harness. It will mount under the cowl, one ear will attach to the right side lower wiper pivot mounting bolt. The flange on the front...
  17. 6

    Ron Morris EFI mounting bracket

    There was a thread a week or do ago looking for EFI computer mounting ideas. Someone linked a photo of a bracket Ron Morris makes or made as in past tense. I checked the on-line catalog at Mustang Plus there was no sign of it there. The Ron Morris web site also does not show it either...
  18. 6

    EFI supply question

    I have been trying to find different alternatives available to keep the fuel pump supplied with a constant supply of fuel. Since the original tank has no baffling this could become a problem when the tank gets low on fuel. A simple (dummy) method would be never let the tank get below half, but...
  19. 6

    Does anybody know anything about this?

    Does anybody know anything about this new Comp Cams camshaft? http://www.compcams.com/information/whatsnew/NewsDetails.asp?ListHistoryID=-1779858990 I am in the process of installing this fuel injection system on my car now. I came across this new cam when I searched Comp Cams for a stronger...
  20. 6

    A Aod?

    An AOD? After putting some miles on my car I have come to the conclusion that an overdrive transmission is a good thing to get. At highway speeds I am turning just over 3K rpms with my current C4 and the 3.55 rear. The cost of fuel is just part of the issue, I would like to reduce the wear and...
Top Bottom
Back
Forums
Menu