Search results

  1. O

    good springs for drag/street setup?

    what are some good springs that will hook on the strip, but be close to stock quality on the street (and give me a nice raked stance at the same time)? i scored some fox spec lakewood 90/10 struts and 50/50 shocks from a friend so i'd like some springs that go well with these. i was thinking...
  2. O

    question on pi heads part no.?

    i found a set of pi heads locally and after counting the valve cover bolts i figured they were windsor heads. however, i take a look at the part no. and i see "RF-XL3E-6090-C20D" and can't find that part no on any headswap lists anywhere. what gives?
  3. O

    best place to buy wheels

    im thinking of buying some deep dish bullitts and was wondering what are some good places to buy them at? some sites are $50 or so cheaper than others, but im hoping for one with good customer service and decent shipping times and prices.
  4. O

    $2000 and a stock npi, what to do?

    hey guys i haven't been on in a while, but that's because i've been working my ass off to make some money, some of which will finally go to my deserving car. anyways, i have around $2000 saved up to drop into my mustang and maybe some more at the end of the summer. my npi motor is completely...
  5. O

    straight thru muffs with prochamber

    for the last couple months i've liked the sound of my race bullets and my upr x-pipe. however, i'm left wanting more of a muscle car sound rather than the exotic tone i have now. anyways, how do prochambers generally sound with straight thru mufflers? i know people usually go chambered with...
  6. O

    quick xcal2 question

    can an xcal2 correct the speedo on a 1998? i know it won't work on 97 and below, but what about a '98?
  7. O

    thinking of switching to mgw short shifter...

    as you can see in my sig, i'm currently using a upr blu thunder as my short shifter. anyways, i think its a great shifter and its held up extremely well. well, i've read and heard so much great stuff about the mgw piece i was thinking of giving it a shot. so yea, anyone have experience with...
  8. O

    posi rebuilt?

    my buddy is getting some rear end gears installed in his '99. anyways, the car has around 80k miles on it and the guy at the differential place said he should have his posi rebuilt which consists of replacing the clutches. so yea, is this necessary and is it really worth the extra $100? sorry...
  9. O

    best place to buy sct xcal2?

    I'm planning on picking up an SCT Xcal2 real soon after hearing so many good things about it. My question is, what are some good places to buy one from? I know most places sell them for around $400, so is that the best I could get one for new? Also are there any places that sell them with...
  10. O

    is this a good price?

    a buddy of mine recently got quoted for a gear install and a posi rebuilt for $350. this price includes everything but the gears which he is supplying. it was $225 for just a gear install but since he's got well over 90k on his '99, the dude at the gear shop suggested they rebuild the posi.:shrug:
  11. O

    buffer recommendations

    as the title says i'm planning on buying a nice buffer to give my car that show quality shine as well as take the yellow off my headlights. anyways, i'm hoping not to spend more than $100, but i doubt you can buy a nice one for less than $50.
  12. O

    brake questions

    well over the past couple weeks i've noticed my stopping power slightly decrease. and well i figure since i've never changed my brake pads since i got my car three years ago that might be the culprit. anyways, i'm a big noob when it comes to brakes and suspension so yea, what else could be the...
  13. O

    making gauges brighter?

    whats the best way to make my gauges brigther? i'm satisfied with the stock color, just looking for something brighter. i know that the gauges take regular leds (not sure what size), but anybody know any compatible ones that are brighter than the ones we already have?
  14. O

    best intake/cams on npi motor w/ stock internals

    Like the title says, what's the best intake and cams one can run on an npi motor w/ stock internals. I know there's the PI stuff, but I see guys going with comp cams and the works on some npi motors. Oh and remember this is on the npi heads, prolly ported, to leave room for a blower.
  15. O

    sylvania silverstar part # help?

    i'm in need of some brighter lights up front. so what sylvania silverstars should i get for my fogs and my heads? and this is for a '98, thanks.
  16. O

    where to get nice exhaust tips?

    like the title says, i'm looking for some nice looking exhaust tips preferably 3" since i think 3.5" would look awkward on a '98. i know there's some mrt ones and borla ones out there, but i just can't fathom spending that much on something purely cosmetic.
  17. O

    how much improvement with pi stuff on blower setup?

    since my intake cracked i've been trying to piece together a pi intake swap for my car. however, my mechanic called me up today telling me he got a deal from a friend for an untouched npi intake w/ aluminum crossover for less than $100!!! anyways, i have plans for installing a blower at the...
  18. O

    my intake finally cracked, got some questions?

    after i changed my oil earlier today i was just giving everything a look see and noticed coolant slightly leaking from the intake (passenger side near the top). anyways, not much coolant really comes out, more like a mist of coolant and only when the engine is revved up. so am i'm okay to...
  19. O

    quick speedo gear question

    my buddy is having some 3.73's installed on his '96 GT this coming week. anyways, he's getting a tune in a couple weeks so he'd rather use a cheap fix like a speedo gear to fix his speedometer. so what speed gear would he need?
  20. O

    just got my upr o/r x-pipe on

    and all i have to say is wow. this x-pipe matched with my dynomax race bullets produces one mean sound. its loud, scary, mean, everything i hoped it would sound like. anyways, i took everyone's advice and got a buddy to help. install was pretty straightforward. i was worred about the rusted...
Top Bottom
Back
Forums
Menu