Search results

  1. F

    Alignment???

    Hey guys Im doing an alignment on my fox on saturday. I was just wondering what people usually set their cars at for a street/strip car with manual steering. I have caster camber plates adjustable rear control arms. So basically I have to adjust caster, camber, toe, and pinion angle. Any angles...
  2. F

    Water Pump Problems

    The only accesories I am running on my fox is alternator and water pump. I also have an adjustable alternator bracket to get rid of the huge ugly stock tensioner and bracket. My belt is now on the opposite side of the pump pulley. So I need a water pump to spin the opposite way. I am going to...
  3. F

    Water Pump

    I am thinking about getting a tuff stuff water pump for my fox. Has anyone used these pumps before? Are they good pumps? Any info would help. Thanks, Dave
  4. F

    Belt???

    Hey guys I have a problem. I just got an electric water pump for my car and the only thing I am running off the belt now is the alternator. My problem is how do I route the belt now. I have an adjustable alternator bracket that keeps the alternator in the stock location but eliminates the...
  5. F

    Electric Water pump

    Hey guys I was thinking about getting a Proform electric water pump for my fox. I was wondering if anyone had one and how they liked it. Any feedback would be appreciated. Thanks, Dave
  6. F

    C4???

    I put a C4 in my fox. My problem is reverse isnt working. I have a B&M hammer shifter in it, and believe I have it all adjusted cause it moves forwards and I have taken it for a ride. The guy that gave me the trans said it was just freshened before he gave it to me. And it looks to be cause...
  7. F

    C4 ???

    Me and my buddy are building a car and we are putting a C4 in it. I was wondering what kind of ATF goes in it. I thought just mercon but wanted to make sure we were putting in the right fluid. And also If any one knows how much it takes please let me know cause we need to know how much to...
  8. F

    Spout

    When setting base timing Ive heard that you have to unplug the spout connector to stop the computer form changing timing. Now Im wondering what is the spout connector? Does any one have a pic of it, and/or where is it located? Thanks, Dave
  9. F

    Gauge

    Im thinking about getting a trans temp gauge. I was wondering what the difference is between mechanical and electrical? Which is better? Thanks, Dave
  10. F

    Timing pointer??

    I need a timing pointer for my new engine. Now my question is I dont know what one to get. Also it looks like there are only adjustable ones on summit and jegs. Why are they adjustable? Also which one do I get it says for 10 o'clock or 11 o'clock. Any info would help. Thanks, Dave
  11. F

    Alternator???

    I have an 89 mustang with a 130a alternator off of the newer 94-95 mustangs. Now my question is can I use an after market alternator bracket for a 94-95 mustang to mount the alternator to the engine with the stock water pump? Cause I know you can use the stock bracket and tensioner but I dont...
  12. F

    Front Brakes???

    I was wondering what size rotors are on the front of the 8 cylinder fox's? Cause I got new rotors today and they are 11" rotors and my old ones are 10". So I was wondering if maybe my spindles are from a 4 cylinder fox. Also I got new pads and the holes on the outer pad don't match the holes...
  13. F

    Spark Plug wires

    I am going to be putting some new spark plug wires on my car and I wanted to see what you guys think is better. I am between 2 sets the ford racing 9mm set and the taylor thundervolt set. Here is a link to each. Ford Racing...
  14. F

    Push Rods

    I am putting pushrods in my new engine and I have to use hardened chromemoly pushrods. Now my question is I know the factory wall thickness of the pushrods is .065 correct? Now could I use .080? There wont be any problems with using a thicker wall correct? The length is still the stock 6.7...
  15. F

    Trans Cooler

    I am going to run an external trans cooler. Now I was wondering what size steel braided lines to use? And also how much line should I get? Im going to mount the cooler to the front of the radiator. Thanks, Dave
  16. F

    Injectors???

    Me and my buddy are going to be building an engine for is fox. We are just doing a 302 or 306 with GT40 aluminum heads, TrickFlow stage I cam, roller rockers, intake manifold, throttle body, and full exhaust. Now my question is does he need to put different injectors in? If he does it would...
  17. F

    TPS???

    I am going to adjust my throttle position sensor. I was wondering what voltage it should be at, at closed throttle and wide open throttle? Thanks, Dave
  18. F

    Engine Balancing???

    I have an engine balancing question. I was wondering where the external weights are supposed to be located in relation to each other. Now say an engine is balanced to a 28oz external balance. Say the 28oz weight on the harmonic balancer is at the bottom of the balancer. Now would the 28oz...
  19. F

    Braking In Engine???

    I was wondering what type of oil I should use when braking in a new engine? I have heard to use a non synthetic, but was just wondering what you guys think. I already know the whole braking in process, and just wondering about the oil. Thanks, Dave
  20. F

    Mini Starters??

    Has any one used this starter before? If so how is it? http://forums.corral.net/forums/showthread.php?t=961324&highlight=starter Or does any one know of any good high torque mini starters for a good price? Im looking for one to use on my foxbody. Let me know if any one knows where to...
Top Bottom
Back
Forums
Menu